Skip to main content ↑ ↓
Topic: New Color Monitor (Read 773 times) previous topic - next topic

New Color Monitor

This topic has been well covered, but I need a little help. I recently installed a new rear camera from RV cams. It works great with my existing Javalina monitor but its black and white. The camera is color. Many of you have purchased cheap monitors and have had no problems. I would like to go the same route. I want to keep my on off sw. along with selecting from camera, compass and tank monitoring. Please give me a suggestions of type of monitor. I plan to remove existing monitor and surface mount new one over opening. What type of connectors will I need and how many inputs should the monitor have. I value every ones thoughts. 
1995 U320 40', 2013 chevy sonic toad, my real love are corvettes have owned 30

Re: New Color Monitor

Reply #1 –

I got it done with an inexpensive Pyle monitor with 2 inputs, and some BNC-RCA adapters.  That allows you to use the existing cables and switches, although the monitor has to be changed to invert the signal when switching between camera & tank monitor. That's not a problem for me anymore as I've scrapped the Audit system and installed a Seelevel.  If you use your existing switch, you shouldn't need the 2nd monitor input.  Or, you can use both inputs....1 for your camera, the other for compass/tanks.  I don't have the compass so I'm not sure if that requires its own input. 

Amazon.com: Pyle Headrest Monitor, 7-inch TFT LCD Widescreen w/ 2 Video...

Amazon.com: Monoprice BNC Female to RCA Male Adaptor - Gold Plated (2 Pack):...

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.

Re: New Color Monitor

Reply #3 –
My new camera isn't working with the existing monitor Not a big deal as I bought a new monitor to boot but now I'm wondering if A the cameras hooked up right or B the monitor was what was wrong all along or not the camera?
Tom
1998 U320 40'

Re: New Color Monitor

Reply #4 –
Did any of you guys use the second input for the monitoring of the tanks, etc. Both monitors look good.
1995 U320 40', 2013 chevy sonic toad, my real love are corvettes have owned 30

Re: New Color Monitor

Reply #5 –
Quote from: joeszeidel –
Did any of you guys use the second input for the monitoring of the tanks, etc. Both monitors look good.
I use one monitor and it hooks up to the javalina box in the dash. the new color monitor can be switched using the switch on the dash just like it did with the old black and white monitor. you will need a bnc to rca adapter plug, available on amazon. I bought a cheap monitor off the auction site and a new color camera. works great for me. I mounted the 7" monitor outside. also when your remove the old monitor use it's power source as pictured here, I attached it to the aluminum tray the B/W monitor was on. I made a simple bracket to hold the monitor on the dash. You can see it in the pic also. it all was easy to do... Hope this helps...

Keith
The selected media item is not currently available.Keith & Jo
2003 U320T 4025 PBBS Designer series
Build 6203    Cummins 500hp
2000 U320 4010 WTFE / Build 5762 —Sold—
Motorcade #18070   
Pasadena, Texas
2015 Jeep Wrangler Sahara-Sunset Orange pearl coat
Don't argue with a fool, people watching might not be able to tell the difference.

Re: New Color Monitor

Reply #6 –
Or you can ask RVCams for the correct monitor and it will come with all the correct connectors-not the cheapest approach but the easiest.
Regards,
Brett

'99 42' Foretravel Xtreme
'14 Brown Motorsports Stacker
'05 Chevy SSR
'02 BMW R1150R

Re: New Color Monitor

Reply #7 –
Quote from: hdff –
I use one monitor and it hooks up to the javalina box in the dash. the new color monitor can be switched using the switch on the dash just like it did with the old black and white monitor. you will need a bnc to rca adapter plug, available on amazon. I bought a cheap monitor off the auction site and a new color camera. works great for me. I mounted the 7" monitor outside. also when your remove the old monitor use it's power source as pictured here, I attached it to the aluminum tray the B/W monitor was on. I made a simple bracket to hold the monitor on the dash. You can see it in the pic also. it all was easy to do... Hope this helps...

Keith
I did the new camera monitor thing milled out old monitor hole to fit new monitor.  the problem I have run into is when the camera picture is in the right position the gauges are backward! Can anyone give me some guidance on this issue?
As Always
Waiting with Anticipation!!
Chris
1999 U 320 DGFE
Build Number 5523
Chris & Elka Lang
In the field, Lonoke AR

Re: New Color Monitor

Reply #8 –
Yes, BOTH the camera and monitor may have/MAY NEED "reverse image" capability.

Set the monitor to read the Javalina output correctly.  Then set the camera so that is reads correctly.

Javalina changed the "straight vs reverse image" thing, so there is no "here is how they are all set up".

Again, Tim at RV.cams is familiar with this.
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020
 

Re: New Color Monitor

Reply #9 –
Keith thanks for the pictures. I like several of monitors in the post. And with the suggestions I have I think I can handle it
1995 U320 40', 2013 chevy sonic toad, my real love are corvettes have owned 30