Skip to main content
Topic: Purge fuel system OEM (Read 567 times) previous topic - next topic

Purge fuel system OEM

How do you purge air from OEM fuel system on a 2000?

I have forgotten how to do that as our 2001 was converted.  I think the OEM was a Winn 20/20

There is a Schroeder valve on the OEM.  Do I recall correctly that I was told to have the engine running and push the valve or perhaps it was a way to run the fuel through with out cranking??

Thanks
Mike
2001 U320 4010 Build 5878 (Gus)
Wrangle Unlimited Toad
Nacogdoches

Re: Purge fuel system OEM

Reply #1
Mike,

I expect someone with first hand information on the WINN system will chime in.

But, until they do, I would NOT suggest a running engine with Schroeder valve open-- that would allow air into the fuel system.  Quite likely that you activate the built in electric pump and open the valve until all the air is purged.

I will delete this post when someone with first hand info posts.
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020

Re: Purge fuel system OEM

Reply #2
Brett think you have got it, jogs my memory of what Mr Risch instructed me when we had that system.  But await if others have alternative ideas before tell my Forum friend who asked me and Scott how to do this.
Mike
2001 U320 4010 Build 5878 (Gus)
Wrangle Unlimited Toad
Nacogdoches

 

Re: Purge fuel system OEM

Reply #3
Here are the instructions for the Winn system in my 2005 U320 manual
Gary Mauck
Deerfield Beach, Fl.
2005 U320 40' PBGB

"Elks Care, Elks Share!"