Skip to main content ↑ ↓
Topic: Removing four button duotherm thermostat cover (Read 485 times) previous topic - next topic

Removing four button duotherm thermostat cover

Going to work on the balky switches today. What is the best way to get cover off? Don't want to break it, seems very well secured. Need specific help. From top, bottom, pry between base and top cover, etc.  Thanks
1998 36 foot U270 Build No. 5328 WTFE, 900 watts solar, Victron controller, B2B, bat monitor, 600 AMPH lithium with 2018 Chevy Colorado toad, SKP #110239, Motorcade #17781, 2021 Escape 17B for when Coach is broken down and campsites are too small, retired and full-timer since Dec. 2020. Part of RV family since 1963.

Re: Removing four button duotherm thermostat cover

Reply #1 –
I did search but did not find a post to guide me on specifics of removing cover.
1998 36 foot U270 Build No. 5328 WTFE, 900 watts solar, Victron controller, B2B, bat monitor, 600 AMPH lithium with 2018 Chevy Colorado toad, SKP #110239, Motorcade #17781, 2021 Escape 17B for when Coach is broken down and campsites are too small, retired and full-timer since Dec. 2020. Part of RV family since 1963.
 

Re: Removing four button duotherm thermostat cover

Reply #2 –
From the bottom of the cover, look for the tab, and pry open with a small screw driver.

Bob
Winter: Texas Rio Grande Valley or Foley, AL
Summer: The Gardens RV Community of Crossville, TN
2000 40 FT U270, Xtreme FBP
2017 C-Max Towed