Skip to main content ↑ ↓
Topic: Fuel Filter Stud (8.3 Cummins) (Read 599 times) previous topic - next topic

Fuel Filter Stud (8.3 Cummins)

I was changing out the secondary fuel filter a couple of days ago. It seemed a little easier to spin off than I'm used to. Turned out the stud that screws into the block was loose. Might be something to check next time you change filters. You can tighten the stud up with an 8mm allen wrench.
jor
93 225
95 300
97 270
99 320

Re: Fuel Filter Stud (8.3 Cummins)

Reply #1 –
Same thing happened to me.
1998 36 foot U270 Build No. 5328 WTFE, 900 watts solar, Victron controller, B2B, bat monitor, 600 AMPH lithium with 2018 Chevy Colorado toad, SKP #110239, Motorcade #17781, 2021 Escape 17B for when Coach is broken down and campsites are too small, retired and full-timer since Dec. 2020. Part of RV family since 1963.
 

Re: Fuel Filter Stud (8.3 Cummins)

Reply #2 –
I didn't know that it came off like that.  I had considered having a different stud made to allow the use of a more modern fuel filter that is larger and filters better.  Maybe I'll look back into it now.
Robert
Build # 5304
1998 34' U270 Cummins 6CTA8.3