Skip to main content ↑ ↓
Topic: Shower Door Gasket (Read 901 times) previous topic - next topic

Shower Door Gasket

Anyone know a source for this seal on the bottom of the shower door? Mine has a rip in it. Thanks.
jor
93 225
95 300
97 270
99 320

Re: Shower Door Gasket

Reply #1 –
I just ordered from AMAZON PRIME LINE PRODUCTS M6184 SHOWER DOOR SEAL. Will need to be cut to size. Not sure if it's the right one yet.
'99 U320 40 WTFE
Build #5462,
1500 Watts Solar 600 amp Victron lithium
2012 Jeep Grand Cherokee Overland Hemi
Instagram bobfnbw
Retired

Re: Shower Door Gasket

Reply #2 –
Shower enclosures are Alumax.  We found a local distributor who found us a local glass shop installer who made us a new shower enclosure in brushed nickel.  All new gaskets, seals, glass and aluminum parts. 

Look inside for the part number.
Roger Engdahl and Susan Green
2001 U320 3610 #5879 (Home2) - 2014 Jeep Cherokee or 2018 F150
Hastings, MN

Re: Shower Door Gasket

Reply #3 –
Roger I took mine apart and sprayed painted it.. Don't think it's going to hold up though.
What did a new shower enclosure set you back, if you don't mind me asking.. There are some on Amazon, but not the same manufacturer. Alumax lists 3 companies in town that might be able to make one.
'99 U320 40 WTFE
Build #5462,
1500 Watts Solar 600 amp Victron lithium
2012 Jeep Grand Cherokee Overland Hemi
Instagram bobfnbw
Retired

Re: Shower Door Gasket

Reply #4 –
All new enclosure with new tempered glass, remove the old, install the new was under $800.  Theybadded a second towel bar.  The new door is hinged differently which make a 2" bigger opening.  Took just over a week.  Pretty good value in my book.
Roger Engdahl and Susan Green
2001 U320 3610 #5879 (Home2) - 2014 Jeep Cherokee or 2018 F150
Hastings, MN

Re: Shower Door Gasket

Reply #5 –
Wonder if you can get the enclosure without glass... since my glass is in great shape. $800 is a good price though.
'99 U320 40 WTFE
Build #5462,
1500 Watts Solar 600 amp Victron lithium
2012 Jeep Grand Cherokee Overland Hemi
Instagram bobfnbw
Retired

Re: Shower Door Gasket

Reply #6 –
The side glass from the original shower enclosure would have worked but the wider door needed new glass.  It was way cheaper to go with new glass all around than to match the lines and etch the new glass for the door.  One of the side pieces had a chip out of an edge as well so all new glass. 

I thought about powder coating but the time to remove and disassemble (without breaking the glass), clean up all the old caulk and reassemble (without breaking the glass) with all new glass and door gaskets and reinstall with new caulk made the price to have it done professionally seem like a bargain especially given a finite life on the powder coating.
Roger Engdahl and Susan Green
2001 U320 3610 #5879 (Home2) - 2014 Jeep Cherokee or 2018 F150
Hastings, MN

Re: Shower Door Gasket

Reply #7 –
WOW, showers have doors? What will they think of next!! :))  >:D
Our '89 has a sliding curtain and if I am not careful I would step in the toilet getting out of the shower. (lots of room :)) )
Stand in the middle of the tub/shower or I wouldn't be able to stand up straight. I have to be centered in the skylight opening and I am only 5'10".
Nitehawk,  Demolition Lady, & our NEW master, Zippy the speeding BB cat.
1989 Grand Villa 36' ORED
Oshkosh chassis, 8.2 DD V8
2006 Saturn Vue AWD

Re: Shower Door Gasket

Reply #8 –
Quote from: Bob and Julie –
Wonder if you can get the enclosure without glass... since my glass is in great shape. $800 is a good price though.
If your paint doesnt work. ( it might after it cures)
Go to Harbour Freight, buy a sand blaster.. sand blast all your parts to get the paint off. Send me the parts and I will powder them for you in oil rubbed bronze...

Re: Shower Door Gasket

Reply #9 –
Good to know. hope the paint hardens and it works out.
'99 U320 40 WTFE
Build #5462,
1500 Watts Solar 600 amp Victron lithium
2012 Jeep Grand Cherokee Overland Hemi
Instagram bobfnbw
Retired

Re: Shower Door Gasket

Reply #10 –
Not to hijack this thread but need a bottom plastic wiper for the bottom of our curved door.  Have not found any ID on the frame anywhere.  P/N ?

Will check with Alumax.
Scott & Carol Seibert
2001 42' double slide U320 - Sold
Previous - 2002 36' U320

Re: Shower Door Gasket

Reply #11 –
Quote from: Carol & Scott –
Not to hijack this thread but need a bottom plastic wiper for the bottom of our curved door.  Have not found any ID on the frame anywhere.  P/N ?

Will check with Alumax.
First one I bought didn't work, this one looks more like it though but haven't checked the actual dimensions yet though. The channel mine goes into it "T" shaped so this one might work, just don't know if the actual dimensions will fit.
amazon
As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
'99 U320 40 WTFE
Build #5462,
1500 Watts Solar 600 amp Victron lithium
2012 Jeep Grand Cherokee Overland Hemi
Instagram bobfnbw
Retired
 

Re: Shower Door Gasket

Reply #12 –
Thanks for the lead.  I'll get my Vermeer calipers out and check dimensions. 
Scott & Carol Seibert
2001 42' double slide U320 - Sold
Previous - 2002 36' U320