Re: FRONT END SERVICE FOR STEERING LINKAGE IN MICHIGAN
Reply #2 –
Jon,
The steering box is totally rebuildable and there are a lot of threads here on the Forum that discuss who thinks who does the best job to rebuild one. As far as the tie rod ends, drag link ends, (ball joints), king pins, and bushings they are readily available off the net. or most any good class 8 truck shop. I would look for a local shop that does farm and log trucks if I couldn't DIY.
Your tie rod ends should be:
Meritor R-230069 (RH)
Meritor R-230068 (LH)
Drag link ends should be:
Meritor R-230070 (RH)
Meritor R-230071 (LH)
I doubt you need king pin parts but if you do I will have to go up to the shop and hunt down those numbers for you.
Now you need to double check these numbers with the axle tag that your coach has to be sure these numbers fit your coach.
Mike