Skip to main content
Topic: Cabinet Work in Mexico (Read 1095 times) previous topic - next topic

Cabinet Work in Mexico

Has anyone had any cabinet work done in Mexico? I am going to replace the TV that is in my coach and I want to do it right, and have it built in which will require my overhead cabinet to e reworked.
Rick Barna
St. Petersburg FL.
1998 U270 36'
Build # 5232
1972 CJ 5 Jeep

Re: Cabinet Work in Mexico

Reply #1
Take a pic, Rick. There are a few 'wood butchers' here that might have some suggestions!
1993 U-240 "La Villa Grande"..CAT 3116 w/ Pacbrake PRXB...Allison 3060 6-speed..
Previous: 1983 Airstream 310 turbo diesel, 1979 Airstream 280 turbo diesel
                                      Build # 4297
                                      PNW natives
                      Home base:  'Cactus Hug' (Ajo, Arizona)
                        DW Judy & Chet the wonder dog
                        Full-Timers 'Sailing the asphalt sea'

Re: Cabinet Work in Mexico

Reply #2
Has anyone had any cabinet work done in Mexico? I am going to replace the TV that is in my coach and I want to do it right, and have it built in which will require my overhead cabinet to e reworked.

Rick, when we owned our '98, I had a cabinet shop in Sevierville, TN cut a couple of doors down in the front of the coach for $20.  I had already removed the old tv and cabinet that surrounded it and installed a 32 inch Sony near the door.  If I was to do it over again, I would remove one of the couches and install a cabinet on the floor and a tv that would raise and lower. 
You can find these available for around $1200.  No more straining our necks!  Unless you are already heading to MX, I would find a cabinet shop close and remove the doors you need to fill or cut down and you would be surprised what little the cost would be if you decide to go that route. 
When we first decided on changing the TV out, we got a price from FOT and needless to say, I did almost all myself for under $200 less the TV.  Their price was in the thousands!  I will try and find some of the old photos and post them.  There is structural tubing behind the wood in the upper front, so no problem in securing a LED TV with security!
Joe & Dottie Allen
Sold!  December 2023.      2000 U320; build # 5645
Our coach " Maxine"
Motorcade #  15922;  Escapee 150950; FMCA F330833; Boondockers Welcome;  Harvest Hosts;  Thousand Trails
'98 U320 from 2000-'06
USAF '62-'66

"Do not spoil what you have by desiring what you have not; remember that what you now have was once among the things you only hoped for." ―Epicurus

Re: Cabinet Work in Mexico

Reply #3
You might consider other options. Our 36' has an open wall so a 50" 4K TV went there. Carol and Jeff have an even larger TV up front where we watched the Super Bowl at Q a couple of years ago. The green monster really came out after I watched the game on it.

You could also modify the liquor cabinet so the TV is on a lift and comes straight up so you can watch it right across from the sofa. One of the European Foretravels  has made this modification and it looks great. Since 4K has such great resolution, it's perfect right across from the sofa. I use a 50" 4K right now as a computer monitor. It's 2 feet away and is outstanding.

Here is a page with all the mechanical lifts featured. Naturally, you want one so nothing is visible when the TV is hidden.
tv lift mechanism | eBay

If you did decide to make the cabinet modification, it would be good to buy the wood ahead of time. I'm sure there are several shops able to do quality cabinet work in PP. Oak would not be a big deal but walnut/cherry might be.

Pierce
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)

Re: Cabinet Work in Mexico

Reply #4
Pierce,
That is a unique looking clock in that picture...looks government?
John  and Cathy VanKampen
1999 U270 36ft build 5426

Re: Cabinet Work in Mexico

Reply #5
Pierce,
That is a unique looking clock in that picture...looks government?
That's the actual replica from Red October after the Russians put it in mothballs. Signed on the back by Vladimir P. Not sure who he is... ;)  ;)  ;) My handler made me a deal when the cold war ended and my mission was finished. ;)

It's well made and runs for eight days. No bells like a regular ship's clock but I guess you can't have a clock chiming when trying to sneak around underwater. They come from several factories in Russian. Here is a link to images: russian submarine clock - Google Search

Anyone looking for a razor sharp 300mm telephoto, here is a great Russian lens. M42 so will fit almost any camera with an inexpensive adapter. Still sharp with a doubler. It's really heavy so a tripod/monopod is needed. A little over $100 on ebay: TAIR-3S 300mm F4.5 - Fotosniper 12 ensemble Lens Reviews - Russian and...

Pierce
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)

Re: Cabinet Work in Mexico

Reply #6
Speaking of big lens I recently picked up a like new Panasonic 100-400mm f4-6.3 for my Olympus EM1-2.  Incredible lens which equals a 200-800mm on a full frame.  A little smaller than a 70-200 f2.8 lens!  And the stabilizer is awesome, actually very usable handheld.
That should keep me from getting eaten by a bear in Alaska next year.
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
no longer 1999 36' U320 build #5522
2013 Rzr 570 & 2018 Ranger XP1000
2006 Lexus GX470
2011 Tahoe LT 4x4
Previous 1998 45' 2 slide Newell, 1993 39' Newell