Skip to main content
Topic: Bulb blown in clearance light (Read 437 times) previous topic - next topic

Bulb blown in clearance light

The rear clearance lights on out 99 U270 appear to be the same as the front ones (but red). To change a front bulb the panels remove behind the cabinets, which made me look in the rear cabinets and a am no stumped!
I do not want to unscrew than from the exterior if they were put in with a massive glob of caulk same as the front ones.
Can someone let me in on the secret?
Thanks
David
David & Emma Roche
Dino (Golden Doodle)
1999 U270 WTFE 36' Build # 5534
Xtreme "Lights, Stripes & Roof"
Motorcade# 18321
Dayton, Ohio
Towd: Jeep Grand Cherokee
Two Townie Electra Bikes

Life is made to enjoy, the Foretravel helps!

Re: Bulb blown in clearance light

Reply #1
You have to remove them from the rear with the 2 screws.
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

Re: Bulb blown in clearance light

Reply #2
I started to do that and decided to play it safe, thanks
David & Emma Roche
Dino (Golden Doodle)
1999 U270 WTFE 36' Build # 5534
Xtreme "Lights, Stripes & Roof"
Motorcade# 18321
Dayton, Ohio
Towd: Jeep Grand Cherokee
Two Townie Electra Bikes

Life is made to enjoy, the Foretravel helps!


 

Re: Bulb blown in clearance light

Reply #4
There are exact looking marker light replacements that are LED.  They replace in same cap hole and screw mounting holes.