Skip to main content
Topic: Need replacement Air bag for 1996 U280 (Read 959 times) previous topic - next topic

Need replacement Air bag for 1996 U280

We have a leak in an airbag AYN1T15L
It's a Firestone. Does anyone know where I could buy one, or if there's a updated part number?
Thanks!

Susan
Susan and Bob
1995 U320CSE
40'
Cummins M11
Coach build #4730
Previous Foretravel's 1996 U280, 1995 U300

Motorcade # 17974


Re: Need replacement Air bag for 1996 U280

Reply #2
Thanks!
Susan and Bob
1995 U320CSE
40'
Cummins M11
Coach build #4730
Previous Foretravel's 1996 U280, 1995 U300

Motorcade # 17974


Re: Need replacement Air bag for 1996 U280

Reply #4
Susan,

When you get it, buy the nuts/washers as they don't come with any, just a protective vinyl cap. Might buy an extra in case one fails on the road.

P
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)

Re: Need replacement Air bag for 1996 U280

Reply #5
You may want to change to the old caps  instead of the new plastic caps. The  Conti 9448 is a good number , used on mine also. 

Re: Need replacement Air bag for 1996 U280

Reply #6
My husband replaced all the airbags but now needs 4 of the elbow air fittings as some were damaged in the process of taking them loose.
We checked Home Depot and Lowe's as well as Ace Hardware and cant find one to match.
Does anyone have a source or would foretravel have them?
Ours is a 1996 U280.

Thanks, Susan
Susan and Bob
1995 U320CSE
40'
Cummins M11
Coach build #4730
Previous Foretravel's 1996 U280, 1995 U300

Motorcade # 17974

Re: Need replacement Air bag for 1996 U280

Reply #7
Those are DOT fittings and not available at most hardware stores .  You will be able to find them at most truck shops, NAPA truck parts, or a Parker hose/fitting store.

Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: Need replacement Air bag for 1996 U280

Reply #8
NAPA should have what you need ask for dot approved fittings
Andy & Eileen
MONTROSE COLORADO
1992 U300  40' 6V92 TA
2016 4 Runner
1998 Jeep Grand cherokee

1998 Jeep Grand Cherokee) Build # 4135 Skp# 122921

Re: Need replacement Air bag for 1996 U280

Reply #9
Thanks, we'll check there.
Susan and Bob
1995 U320CSE
40'
Cummins M11
Coach build #4730
Previous Foretravel's 1996 U280, 1995 U300

Motorcade # 17974

Re: Need replacement Air bag for 1996 U280

Reply #10
Does anyone know of difference in Firestone and Contitech  as far as quality?
Thanks
Chris
1999 U 320 DGFE
Build Number 5523
Chris & Elka Lang
In the field, Lonoke AR


Re: Need replacement Air bag for 1996 U280

Reply #12
I was just curious if anyone and ever cut old ones apart and look at build quality!
Like a Fram oil filter (and I'm sure others also)  the Fram you get at auto parts store with same number is different than what you get at Wall-Mart.  Some things where you buy and brand do make a difference
Chris
1999 U 320 DGFE
Build Number 5523
Chris & Elka Lang
In the field, Lonoke AR


Re: Need replacement Air bag for 1996 U280

Reply #14
I was just curious if anyone and ever cut old ones apart and look at build quality!
Like a Fram oil filter (and I'm sure others also)  the Fram you get at auto parts store with same number is different than what you get at Wall-Mart.  Some things where you buy and brand do make a difference
Chris
Contitech is Continental Tire AG, a top German company. Firestone is Bridgestone owned.

Don't buy Fram filters. Lots of better alternatives like Wix (NAPA Gold), Baldwin, Donaldson, etc.

Pierce

Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)

Re: Need replacement Air bag for 1996 U280

Reply #15
If you take each bag off and fasten it securely on a bench, you can remove the air supply fitting without any damage. Don't be in a hurry! Use the correct tool for the job.

Pierce
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)

 

Re: Need replacement Air bag for 1996 U280

Reply #16
I stand corrected. I do remove the air stud from the bag before removing it. Still, it's securely in place so dealing with a moving bag is not a problem. I was thinking of removing the fittings on my old air dryer.

Thanks, Chuck.

Pierce
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)