Skip to main content
Topic: Electric Reel Possible Issues (Read 647 times) previous topic - next topic

Electric Reel Possible Issues

This was posted for an earlier electrical problem discussion, and it seems that others may be interested so I posted as its own thread. . .

Electric reels have a weak link that does not exist with coaches without reels.

Reels use four spring loaded brushes against four slip rings. Brushes can be a resistive weak link, and if slip ring is rotated when amps are being drawn, the brush / ring contact can arc and pit. And if moved with high amps, the reel can be irreversibly damaged.

Also, over time spring, brushes can break or wear down with normal use.  If one brush fails, that part of the circuit, (hot, hot, neutral, ground) may not work.

BTW, even very small rotations under power can damage the reel. This includes someone stepping on shore cable triggering a little movement of the reel.

Electric reels are desirable, popular, convenient and add a complexity.

Re: Electric Reel Possible Issues

Reply #1
As a FYI,  the newer IH45 & not sure if the IC-37 do not use a reel so do not have this problem.  The power cord is hard wired to the coach. Then there is a mechanism that then extends or retracts the power cord and coils it up in a container when the power switch is activated up or down.
2014 ih45  (4th Foretravel owned)
 1997 36' U295 Sold in 2020, owned for 19 years
  U240 36' Sold to insurance company after melting in garage fire
    33' Foretravel on Dodge Chassis  Sold very long time ago

 

Re: Electric Reel Possible Issues

Reply #2
We installed the same glendinning power cord.  No slip rings.  Had to turn it sideways and put a hole in the compartment wall to extend the cord. No room for a hose reel afterwards

RVCM-7 - Glendinning Products
"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4