Skip to main content ↑ ↓
Topic: 2007 Nimbus 336 Drivers Slide will not retract (Read 549 times) previous topic - next topic

2007 Nimbus 336 Drivers Slide will not retract

Hi there,  We have a jumper connecter but we don't know how to use it for a bypass.  This is for the HWH room extension.  Any help sure would be appreciated. 

Kath & Mike


Thanks,
Kath & Mike
2007 Foretravel Nimbus 336
Toad 2022 Jeep Gladiator Overland edition

Re: 2007 Nimbus 336 Drivers Slide will not retract

Reply #1 –
Either Barry Beams tech website or HWHs trouble shooting section should help you with that. I would start there first.
 Good luck!
Richard & Betty Bark & Keiko our Golden Doodle
2003 U320T 3820 PBDS
Build # 6215
MC # 16926
2016 Chevrolet Colorado 4X4 diesel

Re: 2007 Nimbus 336 Drivers Slide will not retract

Reply #2 –
Does the pump come on when hitting the retract? The main HWH relay and or the pump relay go out. If the coach leveling system is working then it might just be the pump relay. On my coach they are right next to each other on the pump. As a side note the touch pad will appear to operate correctly even with a bad relay.
2002 U270 34' Build 5953
Cummings ISL400HP
3410 Floor Plan
Longview, TX

Re: 2007 Nimbus 336 Drivers Slide will not retract

Reply #3 –
Did you get your slide issue resolved. I'd be interested in hearing what the fix was.

Pat
 

Re: 2007 Nimbus 336 Drivers Slide will not retract

Reply #4 –
You might try here -

This is actually an HWH Tech web page.

CONTACT US
Scott & Carol Seibert
2001 42' double slide U320 - Sold
Previous - 2002 36' U320