Skip to main content ↑ ↓
Topic: Steering wheel removal (Read 494 times) previous topic - next topic

Steering wheel removal

My steering wheel is not aligned with the turn signal switch return mechanism.  It's been that way since I bought coach.  How do you remove VIP steering wheel on a 2005 U320.  I attempted to remove rubber cover, but didn't want to break anything. 

Re: Steering wheel removal

Reply #1 –
Puller after removing the center piece,  I think Vehicle Improvement Products had that info on their web site

Re: Steering wheel removal

Reply #2 –
So the center rubber piece just pulls off?

Re: Steering wheel removal

Reply #3 –
You could look at the site?  Maybe two screws if memory serves me

Re: Steering wheel removal

Reply #4 –
Looked at site and sent email to tech support.  Didn't find manual.  There are 10 screws on bottom.  4 for each side switch panel and two for bottom center/horn button.  See nothing holding rubber center cap. Appears to snap on but really tight.  Will try again later.

Re: Steering wheel removal

Reply #5 –
Found it.  Allen screw under the horn button at 45 degrees.   
 

Re: Steering wheel removal

Reply #6 –
You got it