Skip to main content ↑ ↓
Topic: Servicing leece Neville alternator (Read 422 times) previous topic - next topic

Servicing leece Neville alternator

, what is the best way to clean of the surface rust of my alternator and the armature, the copper windings look clean , personally I would use a very fine sandpaper, or maybe someone has a better idea , also I'm thinking of replacing with new regulator , I think I may have blown it when I connected wrong way round , 1 of the brushes is stuck inside and the other wasn't alot left on it , so would a new regulator come complete with new brushes ?  Also can I test the coil windings using a normal volt meter / continuaty tester , ?
1990 foretravel grandvilla, Oshkosh chassis
8.2ltr Detroit turbo

Re: Servicing leece Neville alternator

Reply #1 –
Quote from: kevo0000 –
, what is the best way to clean of the surface rust of my alternator and the armature, the copper windings look clean , personally I would use a very fine sandpaper, or maybe someone has a better idea , also I'm thinking of replacing with new regulator , I think I may have blown it when I connected wrong way round , 1 of the brushes is stuck inside and the other wasn't alot left on it , so would a new regulator come complete with new brushes ?  Also can I test the coil windings using a normal volt meter / continuaty tester , ?
Be careful of using anything on the commutator. They make a special product for it, Emery or sandpaper is not good.

 DIAMOND D Brush Seater - 426P67|BRSRX15MS - Grainger
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

Re: Servicing leece Neville alternator

Reply #2 –
Ok thanks , IL get some of that stuff
1990 foretravel grandvilla, Oshkosh chassis
8.2ltr Detroit turbo

Re: Servicing leece Neville alternator

Reply #3 –
Quote from: kevo0000 –
so would a new regulator come complete with new brushes ?  Also can I test the coil windings using a normal volt meter / continuity tester , ?

The last Leece Neville alternator I owned was in my 1964 White.  So THAT alternator had a separate holder for the brushes.  And a separate regulator.

Yes you can test the alternator windings for continuity and compare the resistance of one coil to another.

If your Volt Ohm Meter has a diode position you can test the alternator diodes.
1992 Foretravel Grand Villa
U225 SBID Build No. 4134
1986 Rockwood Driftwood
1968 S.I.A.T.A. Spring
1962 Studebaker Lark
1986 Honda VF700C
1983 Honda VF750C
Charlie, the Dog was broken out of jail 24 Oct 2023
N1RPN
AA1OH (H)e who must be obeyed.

Re: Servicing leece Neville alternator

Reply #4 –
You can get new brushes and a new regulator. I use a paper clip that I have straightened to hold the brushes and then put the regulator on then before tightening the regulator pull out the clip or you can use a drill bit to hold the brushes.
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins
 

Re: Servicing leece Neville alternator

Reply #5 –
Thanks for bringing back the memories, Red Tractor. My dad repaired alternators that same way for 30+ years. I can remember walking into his shop as a teenager and thinking how wierd that "thing" looked with a paper clip stuck in it. 😯
The selected media item is not currently available.
Lynn & Marilyn Sickel
Tollville, AR
1997  U320  40'
2021 Chevrolet Silverado pickup
Motorcader  17257