Skip to main content ↑ ↓
Topic: Changing auto-reset breakers in coach (Read 426 times) previous topic - next topic

Changing auto-reset breakers in coach

Ok. Got my new breakers from Brad at FT. Pulled the passenger stairwell panel off to view them. Found the bad one thanks to the Tech  line and Ronny at FT and now need to change it. Looks like the  breakers are captured by a copper buss bar feeding the entire row.  I assume I need to remove it on all to replace one breaker? Turning master switch off enough to work on them?
Thanks
1996 U295-36, Cummins 300hp, 8.3. Build number 4864. Vin number 1F97D536XTNO54271. Purchased October 31, 2019.

Re: Changing auto-reset breakers in coach

Reply #1 –
Depends on which bus.  Try it and check with a DVM.

Rich
Rich and Peggy Bowman
2002 U270 3610 WTFS, build #5939--"Freedom"
2022 Jeep Grand Cherokee Summit 4xe
SMI AirForceOne brake system
PakCanoe 15
 

Re: Changing auto-reset breakers in coach

Reply #2 –
Re sourcing them, they are common breakers available at any auto parts store.

Quote
Turning master switch off enough to work on them?
No. I would disconnect the batteries if you want to shut it all down.
jor
93 225
95 300
97 270
99 320