Skip to main content
Topic: Ign key lock (Read 499 times) previous topic - next topic

Ign key lock

Hya all, has anyone ever took one of these locks out before, it's baffling me if you look at photo there are two little notches and that piece turns until it is not connected to the barrel, why won't the barrel just push out, I need to get at the back of it to secure one of the wires that came out I managed to push it back in ages ago cause I gave up trying and thought will come back to this job at a later date I can't get my head in far enough to see the back of the switch, is the barrel connected to the dash with another sort of securing device, I'm thinking of getting a mirror rigged up in behind with a light, any suggestions
1990 foretravel grandvilla, Oshkosh chassis
8.2ltr Detroit turbo

Re: Ign key lock

Reply #1
Hya all, has anyone ever took one of these locks out before, it's baffling me if you look at photo there are two little notches and that piece turns until it is not connected to the barrel, why won't the barrel just push out, I need to get at the back of it to secure one of the wires that came out I managed to push it back in ages ago cause I gave up trying and thought will come back to this job at a later date I can't get my head in far enough to see the back of the switch, is the barrel connected to the dash with another sort of securing device, I'm thinking of getting a mirror rigged up in behind with a light, any suggestions
Follow this thread. After the barrel is pulled out you can unscrew the bezel and the switch will fall out the back.

Getting ignition key made
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean


Re: Ign key lock

Reply #3
Does the battery have to be disconnected to do this?
'99 U320 40 WTFE
Build #5462,
1500 Watts Solar 600 amp Victron lithium
2012 Jeep Grand Cherokee Overland Hemi
Instagram bobfnbw
Retired

Re: Ign key lock

Reply #4
To go along with TexHub's video, here's the link from Barry's site on replacing the whole switch.
jor

Replacing Foretravel Ignition Switch
93 225
95 300
97 270
99 320

Re: Ign key lock

Reply #5
Does the battery have to be disconnected to do this?
Changing the lock cylinder is just like turning the key to acc. no reason to disconnect the battery unless you are going to leave it in that position for a long time and are worried about battery drain. If you are familiar with the switch you can use a screwdriver and turn it off and later turn it back on again to install the cylinder.
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean