Skip to main content
Topic: Gas struts at LP tank door (Read 1358 times) previous topic - next topic

Re: Gas struts at LP tank door

Reply #25

RV Compartment Door Latch
Search results for: '1192'

I used these, they are slightly different then the OEM latches but the same source.  As most have done, bit of modification helps. 

You have to disconnect the cable and then reconnect it with a crimp on cable ferrule.
Amazon.com: TOUHIA 100 Pcs 1/16" Aluminum Crimping Loop Sleeve Double Barrel...

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
Roger Engdahl and Susan Green
2001 U320 3610 #5879 (Home2) - 2014 Jeep Cherokee or 2018 F150
Hastings, MN

Re: Gas struts at LP tank door

Reply #26
Bay door latches
Regards,
Brett

'99 42' Foretravel Xtreme
'14 Brown Motorsports Stacker
'05 Chevy SSR
'02 BMW R1150R

Re: Gas struts at LP tank door

Reply #27
I am enclosing a few pictures to wrap this up. One shows the rig I used to compress the 100# gas struts about 1 1/2" in order to install them. It took a few attempts, but they are in.
The other photos show modification necessary to install new latches. I bought mine on ebay. Bought the wire rope and ferrules at Lowes. Originals used center holes. New ones came riveted in center holes. I drilled them out, and used 3/16" rivets in corners. I pounded the rivets flat and filed as needed. I made up a spare set "just in case". Wasn't too difficult. Done!!
Couldn't have done it without Roger's input. Thanks!!
Glenn and Amy Beinfest
2001 36' U320
#5812
2014 Honda CRV

No Whining on the YACHT

 

Re: Gas struts at LP tank door

Reply #28
Brad at FT will know
1996 U295-36, Cummins 300hp, 8.3. Build number 4864. Vin number 1F97D536XTNO54271. Purchased October 31, 2019.