Skip to main content ↑ ↓
Topic: secure engine exhaust pipe (Read 599 times) previous topic - next topic

secure engine exhaust pipe

Any suggestions on how to secure this pipe. I can't find a good place to secure it to the frame. any suggestions or pictures would be helpful.

2000 U 320

Re: secure engine exhaust pipe

Reply #1 –
First,fill out your signature so we know what specific model it is,if your talking about the long lowest hose hanging down that is a
hydraulic line,you may be able to pull it up with some cable ties with some spare hose pieces wrapped around the hose but be gentle it may be brittle from age.If you mean an actual exhaust pipe,any auto store will sell exhaust pipe hangers.

Re: secure engine exhaust pipe

Reply #2 –
Thank you

The unit is a 2000 U 320.  The pipe is for hydraulic? Does it get hot

Re: secure engine exhaust pipe

Reply #3 –
It'll get warm, not hot.  Plastic ties will work fine.

Re: secure engine exhaust pipe

Reply #4 –
That coolant tube runs from the transmission cooler to the water pump inlet. There's supposed to be a hangar, attached to the bottom of the engine, to support it. The hangar attaches to the right side oil pan rail, via one of the rearmost oil pan screws. Look for a broken hangar under one of the RR screws. That's how ours is attached. I'll get a pic for you, tomorrow. (Tuesday)

Greg

Re: secure engine exhaust pipe

Reply #5 –
A couple pics of the hangar on ours. Yours should be the same.
 

Re: secure engine exhaust pipe

Reply #6 –
Greg,
Those are excellent, informative pictures. 
Richard