Skip to main content ↑ ↓
Topic: Air Dump Solenoid 2000 U320  (Read 459 times) previous topic - next topic

Air Dump Solenoid 2000 U320

Looking for the Air dump Solenoid. Can anyone share possible locations? A picture of what it looks like would be helpful.

Re: Air Dump Solenoid 2000 U320

Reply #1 –
The air dump solenoid valve is the two center valves on the six pack.  Six pack for the front is located above the steer axle mounted to the underside of the floor.

Recommend you block the coach before going under it or put the coach on a pit
Rudy Legett
2003 U320 4010 ISM 450 hp
2001 U320 4220 ISM 450 hp
1995 U320 M11 400 hp
1990 Granvilla 300 hp 3208T
Aqua Hot Service Houston and Southeast Texas

Re: Air Dump Solenoid 2000 U320

Reply #2 –
Diagram (linked below) of the 6-pack manifolds.

As Rudy says, when you "dump" the air in the suspension you are using the 2 middle solenoid valves in the 6-pack manifolds.

1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: Air Dump Solenoid 2000 U320

Reply #3 –
Why do you think you need a solenoid?

If the coach won't lower on a particular corner, check the dump ports on the manifold for mud dauber nests first.
Learn every day, but especially from the experiences of others. It's cheaper!  - John C. Bogle

2000 U320 36' non-slide / WildEBeest Rescue
2003 U320
 

Re: Air Dump Solenoid 2000 U320

Reply #4 –
Quote from: Michelle –
If the coach won't lower on a particular corner, check the dump ports on the manifold for mud dauber nests first.
Plugged manifold exhaust ports discussed in thread linked below:

Mason Bee Plugs in 6-Pack Exhaust Ports
1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"