Skip to main content ↑ ↓
Topic: Transmission retarder found a part (Read 414 times) previous topic - next topic

Transmission retarder found a part

Today I was removing the hydraulic hose from the Allison transmission to the retarder after all the transmission oil  run out I  put floor dry to clean the oil and I found this rubber looking part.  It look  like a plunger and I think it came out of the hose on the retarder side of the hose ?? Since I  hadn't removed the hose on the transmission side  or maybe it was just mixed up in the floor dry has anyone ever seen this part
Rick & Hilda looking forward to full- timing one day for now couple of months at a time
1999 U270 3602
Built number  5530.  Feb 1999            Motorcade  number 18438
8.3 Cummins Allison six speed with brake  retarder
Purchased Nov 28 2019

Re: Transmission retarder found a part

Reply #1 –
That is the exhaust cover for a ride height valve.

Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: Transmission retarder found a part

Reply #2 –
Part number RN10JE

RN10JE by HALDEX - Exhaust Cover Kit
1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"
 

Re: Transmission retarder found a part

Reply #3 –
Quote from: Pamela & Mike –
That is the exhaust cover for a ride height valve.

Mike
Thanks mike I must have knocked it off when under there will check it out tomorrow Would've never figured that out would of never looked there  you learn something every day
Rick & Hilda looking forward to full- timing one day for now couple of months at a time
1999 U270 3602
Built number  5530.  Feb 1999            Motorcade  number 18438
8.3 Cummins Allison six speed with brake  retarder
Purchased Nov 28 2019