Skip to main content
Topic: Vanity mirror (Read 345 times) previous topic - next topic

Vanity mirror

Had one of the medicine cabinet mirrors fall off.  Amazingly, it didn't break.  What adhesive should I be using to remount the mirror?
Dan & Lauren - Pine Ridge, FL
2000 U320 42 CAI
Build #5766

Re: Vanity mirror

Reply #1
I had SOB and had some mirrors that I had to replace, I just used what the factory used. At that time they just used silicone, and tape it in place until it dries.

I don't know if there is any benefit in using the mirror mastic to mount the mirror instead of the silicone. Maybe someone else will have some experience.
John Hobbs
1995 U300 SE
M11 / Retarder
Private toilet
1 of 1
Wichita, Ks

Re: Vanity mirror

Reply #2
Looks like double-sided tape and silicone.  I'll put it back up the same way.
Dan & Lauren - Pine Ridge, FL
2000 U320 42 CAI
Build #5766

 

Re: Vanity mirror

Reply #3
NO first hand experience, but verify that whatever you use won't remove the silvering from the back of the mirror.
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020