Skip to main content ↑ ↓
Topic: Set to high idle using Smart Wheel (Read 896 times) previous topic - next topic

Set to high idle using Smart Wheel

I can't seem to set my engine on high idle anymore using the "Smart Wheel". With engine running, transmission in neutral, parking brake on, I thought I used to turn the cruise-control on, then hold down the ON button and press the cruise resume button and the idle speed would increase. This doesn't work anymore. Am I doing something wrong? And if not is there a way to diagnose the problem?
1998 U295 36' No slides
Towing 2018 Jeep Wrangler
Previous rigs:
  1995 26' Fleetwood Flair
  1998 34' Fleetwood Bounder
  1997 40' Bluebird BMC
  1999 24' Winnebago Minnie Class C
 

Re: Set to high idle using Smart Wheel

Reply #1 –
Dan, with engine at idle, park brake pulled, neutral gear selected, press and release ON/OFF button to turn cruise control ON.  Then push and release the "SET" button to increase rpm to about 800 to 900 rpm.  OR, push and release the "RESUME" button to increase rpm to about 1100 rpm.
Rudy Legett
2003 U320 4010 ISM 450 hp
2001 U320 4220 ISM 450 hp
1995 U320 M11 400 hp
1990 Granvilla 300 hp 3208T
Aqua Hot Service Houston and Southeast Texas