Skip to main content ↑ ↓
Topic: Microphor solenoid gasket (Read 326 times) previous topic - next topic

Microphor solenoid gasket

So the good news is that I am now intimately familiar with the inner workings of a microphor toilet.

The bad news is that Spending all summer in Phoenix must have destroyed the gasket that sits in front of the solenoid plunger. When the water pressure is turned on it's spews water Where the solenoid meets the plastic housing That the water runs into. I tried everything I could think of including taking it apart and shooting plumbers grease in there and couldn't get it to seal so I think it's time for a new one.

Can we still get these parts? Has anyone battled this one before?

Video link: Imgur: The magic of the Internet
1987 Grand Villa ORED
2001 U320 4010

Not all that wander are lost... but I often am.

Re: Microphor solenoid gasket

Reply #2 –
I've been there, but all my working parts sit on the floor in the cabinet behind the toilet.
2000 U320 mid entry  #5688
2006 Jeep Liberty


USMCR retired
SDFD retired
FEMA US&R TF8

Re: Microphor solenoid gasket

Reply #3 –
I've been there, but all my working parts sit on the floor in the cabinet behind the toilet.  I had to put in a leak detector back there.
2000 U320 mid entry  #5688
2006 Jeep Liberty


USMCR retired
SDFD retired
FEMA US&R TF8

Re: Microphor solenoid gasket

Reply #4 –

Dometic 320
Wish i had the room like you do. I would convert to the manual
Amazon.com: Dometic 302320081 320 Series Standard Height RV Toilet, White :...
I'm going to anyway but much more involved to make it work
Scott

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
 

Re: Microphor solenoid gasket

Reply #5 –
Quote from: Sven and Kristi –
I've been there, but all my working parts sit on the floor in the cabinet behind the toilet.  I had to put in a leak detector back there.

Yikes I'm getting scared again