Skip to main content ↑ ↓
Topic: Ice maker water supply shut..just making sure  (Read 364 times) previous topic - next topic

Ice maker water supply shut..just making sure

Attaching two pics of the refrigerator access on the exterior. I currently have the ice maker unplugged from power (one of two plugs located to the side) and have the blue solenoidcapped off as well as the line supplying it. The second pic shows a water hose(?) attached to the underneath of the blue solenoid which is wrapped in tin foil. To avoid any water getting to the ice maker (for winterization...and I do not use the ice maker anyway) do I have to disconnect that line as well or am I good to go??
Peter
 
Peter    Alberta Canada
'98 U320 40'  Build 5359 M11 450 HP, Aqua hot, Blu Ox

Re: Ice maker water supply shut..just making sure

Reply #1 –
The only water inlet is the one that you have capped off so no water can get into the valve.
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins

Re: Ice maker water supply shut..just making sure

Reply #2 –
Thanks for the confirmation..
Peter
Peter    Alberta Canada
'98 U320 40'  Build 5359 M11 450 HP, Aqua hot, Blu Ox
 

Re: Ice maker water supply shut..just making sure

Reply #3 –
You can also look under your kitchen sink and remove the line or turn off the valve that goes to it. May be a good time to upgrade the filter if you have not already, I was able to disconnect the feed line adding this filter.
New Under Cabinet Water Filter
Jason
2000 U295 36' Non-slide  ISC350