Skip to main content
Topic: Wondering if seats from a 2003 Foretravel U320 would bolt into my 1996 U295?  (Read 432 times) previous topic - next topic

Wondering if seats from a 2003 Foretravel U320 would bolt into my 1996 U295?

Wondering if seats from a 2003 Foretravel U320 would bolt into my 1996 U295?

Re: Wondering if seats from a 2003 Foretravel U320 would bolt into my 1996 U295?

Reply #1
Idk for sure, but if both seats are Flex steel I would imagine they are the same. Only tsk a few minutes with a tape measure to be sure.

Re: Wondering if seats from a 2003 Foretravel U320 would bolt into my 1996 U295?

Reply #2
What kind of seats are we talking? Front seats, couch or toilet seat? Kinda confused :))

If its the drive seats then its just a baseplate.. you can weld another or reuse the old.. Couch should fit if the tape reads correctly.. Not sure on the latter.

Re: Wondering if seats from a 2003 Foretravel U320 would bolt into my 1996 U295?

Reply #3
Yes

Re: Wondering if seats from a 2003 Foretravel U320 would bolt into my 1996 U295?

Reply #4
Villa's were removed and Flexsteel's installed under warrantee on my coach by the original owner as he was very large and the Villa's were wider making it difficult for him. They drilled new holes to match the Flexsteel baseplate.

Re: Wondering if seats from a 2003 Foretravel U320 would bolt into my 1996 U295?

Reply #5
What kind of seats are we talking? Front seats, couch or toilet seat? Kinda confused :))

If its the drive seats then its just a baseplate.. you can weld another or reuse the old.. Couch should fit if the tape reads correctly.. Not sure on the latter.

Front seats. Thank you for your help.

 

Re: Wondering if seats from a 2003 Foretravel U320 would bolt into my 1996 U295?

Reply #6
I took out my 1998 front seats and then installed some from the "old things" in the FOT warehouse.  I was told they might be 2002-2003's.
I used one of the old bolt holes, and had to drill 3 new holes, to match the new seats larger bases.