Skip to main content ↑ ↓
Topic: New Tires: Proper Thread Direction and Torque for 2000 U270 34' (Read 380 times) previous topic - next topic

New Tires: Proper Thread Direction and Torque for 2000 U270 34'

New Tires all the way around this next week.  First set since we purchased the coach in 2017.  All are now 6-7 years although no checking or issues since new.

Two question to be sure I can check tire shop:

1. Direction of threading passenger vs Driver side - end of studs on all wheels stamped MR
2. Proper torque
3. Does wheel need re-torque after some initial mileage

Thanks

Randy
Randy (N4TDT) and Karen Crete
Sarasota, Florida
SOLD:  2000 U270 34' WTFE Build 5756 "Ole Red"

Re: New Tires: Proper Thread Direction and Torque for 2000 U270 34'

Reply #1 –
Your year has hub center wheels all right hand thread. 450 lb- 550 lb torque dry and clean threads. This is the info I have found. There are other threads showing light oil.
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

Re: New Tires: Proper Thread Direction and Torque for 2000 U270 34'

Reply #2 –
For general information:

On a coach with left hand threads on the driver's side, there should be an "L" on the stud.
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020

Re: New Tires: Proper Thread Direction and Torque for 2000 U270 34'

Reply #3 –
Foretravel annual service for my year coach advises retorquing every 12 mos.  I just had a valve leak on the road.  A new valve stem was installed, and the wheel was torqued to 500 lbs.  The commercial truck tire shop directed me to their sister shop 100 miles down the road for a retorque at no charge.  They felt so strongly about it that they would not replace my shiny plastic hub covers.  I complied, and I was surprised at how much more those nuts moved at the second visit. 
Mark, Monique & Steven Hachigian
2004 36U295 Build No. 6239
2011 Honda CRV 4WD
2024 Dynamax Isata 5 30fw Xplorer

Re: New Tires: Proper Thread Direction and Torque for 2000 U270 34'

Reply #4 –
When I retorque I hardly ever have a nut move but I will always retorque.
Peter and Frieda Morin
1999 36ft. U320 Foretravel
Build # 5436
1998 Suzuki Sidekick Sport
 

Re: New Tires: Proper Thread Direction and Torque for 2000 U270 34'

Reply #5 –
Quote from: oldguy –
When I retorque I hardly ever have a nut move but I will always retorque.
Good to mark the nut and wheel position line with a felt marker, back the nut off a tiny bit and then retorque.

Pierce
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)