Skip to main content ↑ ↓
Topic: Entry step and floor in front of passenger 1995 U320C SE (Read 281 times) previous topic - next topic

Entry step and floor in front of passenger 1995 U320C SE

We picked up our new to us 1995 U320C SE in Florida in November..
We previously had a 1996 U280 and a 1995 U300.
We drove it home to Ohio and are getting it ready for our first trip in three weeks.
The entry step does not close when engine is started and the sliding floor in front of the passenger seat doesn't slide out when the power switch is pressed.
Any ideas on what we should check first?
Thanks , Susan
Susan and Bob
1995 U320CSE
40'
Cummins M11
Coach build #4730
Previous Foretravel's 1996 U280, 1995 U300

Motorcade # 17974

Re: Entry step and floor in front of passenger 1995 U320C SE

Reply #1 –
A valve for each on the back side of step well underneath.
Dub McBride 1996 270

Re: Entry step and floor in front of passenger 1995 U320C SE

Reply #2 –
Check the valves for air leaks, check that there is 12 v power to valve.
Dub McBride 1996 270

Re: Entry step and floor in front of passenger 1995 U320C SE

Reply #3 –
Also check that there is air pressure there. I think each valve has a regulator with a gauge on it so you can see if there is air pressure.
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins
 

Re: Entry step and floor in front of passenger 1995 U320C SE

Reply #4 –
Thanks so much, I will have Bob check there.
Susan and Bob
1995 U320CSE
40'
Cummins M11
Coach build #4730
Previous Foretravel's 1996 U280, 1995 U300

Motorcade # 17974