Skip to main content ↑ ↓
Topic: Microphor toilet clear tube from vacuum breaker (Read 197 times) previous topic - next topic

Microphor toilet clear tube from vacuum breaker

I was attending to a leak from my microphor below the toilet and took the electrics and vacuum breaker out for access. In doing so the clear small tube attached to the vacuum breaker came off from somewhere on the bottom of the toilet. The tube is still attached to the vacuum breaker but is disconnected below.  It has a small threaded end on it but for the life of me I can not find where it connects. The pictures in the manual are unclear. I do know when the toilet flushes with the water on, the tube blows water ( I know I got soaked). Can anyone advise where that attaches to  the base of the toilet??? I can not locate it.    I do want to replace the toilet eventually but for now it works fine
Peter    Alberta Canada
'98 U320 40'  Build 5359 M11 450 HP, Aqua hot, Blu Ox

Re: Microphor toilet clear tube from vacuum breaker

Reply #1 –
This is better than trying to explain.

Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: Microphor toilet clear tube from vacuum breaker

Reply #2 –
Interesting
I do not have one of those on my microphor
Peter    Alberta Canada
'98 U320 40'  Build 5359 M11 450 HP, Aqua hot, Blu Ox
 

Re: Microphor toilet clear tube from vacuum breaker

Reply #3 –
Peter,

If it isn't in that 90 where the bowl overflow attaches then you will have to look close around the hopper for an attachment hole. That water has to be discharged to the black holding tank. Be aware that a previous owner could have been creative and moved that hose for some reason.

Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."