Skip to main content ↑ ↓
Topic: Silverleaf Fuel tank Level Configuration.  (Read 274 times) previous topic - next topic

Silverleaf Fuel tank Level Configuration.

On my 2014 ih when I fill the tank it will read full. Problem is when it shows I am down to 60 gallons I can barely put 100 gallons in. 
When I was getting my Silverleaf Dash setting via holding down the drive and scan buttons for a few seconds there is an option of Fuel Tank Configuration.  There are two setting Fuel Tank Empty Counts which is 12 and Fuel Tank Full Counts which is 117.  I had called Silverleaf and their suggestion is to press the Calibrate Full when I have the tank 100% full and then to have an empty tank via pumping all of the fuel out of the tank and pressing the Calibrate Empty. 

tsonby gave me his setting for his 2014 ih and the only difference is his Fuel Tank Fuel Count is 110 (mine 117) 

I was looking at changing my to what tsonby has to see if that makes it any more accurate.
Anyone have any input on this.