Skip to main content ↑ ↓
Topic: Re: slide hydrulic (Read 272 times) previous topic - next topic - Topic derived from hwh

Re: slide hydrulic

[back hydrulic ram leaking how do i get to it slide is out do i start by removing the sofa ? Fred 

Re: slide hydrulic

Reply #1 –
It would help us if you could tell us what year and model coach you have as they are not all the same components.
Richard & Betty Bark & Keiko our Golden Doodle
2003 U320T 3820 PBDS
Build # 6215
MC # 16926
2016 Chevrolet Colorado 4X4 diesel

Re: slide hydrulic

Reply #2 –
also i have j safe and Dianne set

Re: Re: slide hydrulic

Reply #3 –
Quote from: rbark –
It would help us if you could tell us what year and model coach you have as they are not all the same components.
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020

Re: slide hydrulic

Reply #4 –
Fred if you take off the bottom skirt on the part of the j lounge that is closest to the ram you want to replace. You will be able to see the mounting points of the j lounge and take them out. It is screwed to the floor. I don't think you need to remove the other part of the couch.
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins

Re: slide hydrulic

Reply #5 –
Fred has a u320 40 ft 2000 or 2001.
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins

Re: slide hydrulic

Reply #6 –
On the 2000 & 2001 coaches you can get partial access to the arms from underneath the slide outside. I believe they can be disconnected from there, @dsd can probably confirm. Otherwise, the arms are also accessible from the inside but take some work to get to. On my 2001 the aft arm was concealed by wood paneling that was velcroed on and only accessible once the J-dinette was removed.
1987 Grand Villa ORED
2001 U320 4010

Not all that wander are lost... but I often am.
 

Re: slide hydrulic

Reply #7 –
sofe out how dose ram be remove fred