Skip to main content ↑ ↓
Topic: How to Remove Uline Ice Maker (Read 785 times) previous topic - next topic

How to Remove Uline Ice Maker

I want to remove the built in Uline icemaker to replace ice making mechanism as outline in this YouTube video:

https://youtu.be/M_2wqKQDTyc

Just not sure how the unit is installed in the cabinet and how it's plumbed. I'm sure it's easy to slide out, but I've never had a reason to do it so far. Once I understand that the rest of the repair looks pretty easy.
Randy (N4TDT) and Karen Crete
Sarasota, Florida
SOLD:  2000 U270 34' WTFE Build 5756 "Ole Red"

Re: How to Remove Uline Ice Maker

Reply #1 –
Modified ours but not using the expensive ULine replacement. Ours has a WPL D7824706Q installed.
Only difference I noticed is that it takes longer to make ice BUT the cubes are larger that the original ULine unit.
Ran it for over a week in the garage with no problems, it'll be going south with us soon for our winter travels.
Frank & Connie Williams
1999 U320 '36
Build: 5466
MC: 18335
 

Re: How to Remove Uline Ice Maker

Reply #2 –
The plastic water line needs to be turned off under kitchen sink that goes from filter to ice maker. Remove plastic bottom cover. Disconnect female brass garden hose connection at ice maker . Have small towel to catch water. You will find ice maker mounting flange screwed to cabinet. Slide out ice maker until you can disconnect 120 volt power cord.
1998 36 foot U270 Build No. 5328 WTFE, 900 watts solar, Victron controller, B2B, bat monitor, 600 AMPH lithium with 2018 Chevy Colorado toad, SKP #110239, Motorcade #17781, 2021 Escape 17B for when Coach is broken down and campsites are too small, retired and full-timer since Dec. 2020. Part of RV family since 1963.