Re: No Power to Thermostat
Reply #13 –
As Joe says in reply 5, remove the thermostat and check the RJ45 connection. To remove the thermostat take a fork and use a single tine to unlatch the catch at the bottom of the thermostat by sliding it right or left, I don't remember. Then Tilt it up and remove from wall mount. When you unplug the control wire make sure you don't let it slide into the wall or you will have a new problem.
Shoot some contact cleaner into the connection and then plug and unplug it five or six times. Turn on thermostat. If it doesn't come on then go to your forward AC inside the coach and remove the filter cover and then take screws out of the cover and remove it. Now you should see the other end of that control cable and do the same cleaning procedure. Plug in and check thermostat again. You could also by pass the cable in the wall with a test cable through the interior of coach. Power for the thermostat comes from that AC control board on the forward AC and runs through that cable.
My bad connection was control cable at AC unit.