Skip to main content
Topic: fuel line on ISM from primary to secondary. (Read 343 times) previous topic - next topic

fuel line on ISM from primary to secondary.

Has anyone changed the fuel line from the primary to the secondary on a U320? I am over 2 hours into it and still haven't found another zip tie or clamp to get it out. Doing the prechecks found the line seeping and didn't want to go to the Q and have the need to get a road mechanic involved. Takes more equipment than I carry to change it on the road. Tomorrow I will get it out or re-route a new line.
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

Re: fuel line on ISM from primary to secondary.

Reply #1
Has anyone changed the fuel line from the primary to the secondary on a U320? I am over 2 hours into it and still haven't found another zip tie or clamp to get it out. Doing the prechecks found the line seeping and didn't want to go to the Q and have the need to get a road mechanic involved. Takes more equipment than I carry to change it on the road. Tomorrow I will get it out or re-route a new line.
I dont recall anything difficult?

Re: fuel line on ISM from primary to secondary.

Reply #2
So far removed the starter, 5 zip ties 2 metal clamps and still get no movement pulling the line from either side of the obstruction which I can't find. It is bundled with many hoses and wires.
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

 

Re: fuel line on ISM from primary to secondary.

Reply #3
So far removed the starter, 5 zip ties 2 metal clamps and still get no movement pulling the line from either side of the obstruction which I can't find. It is bundled with many hoses and wires.
I did not remove my starter