Skip to main content ↑ ↓
Topic: Changing out radio on older uni-home (Read 1013 times) previous topic - next topic

Changing out radio on older uni-home

Has anyone changed out a radio on a U225 or U240?  Did you have to replace the Sony ISO DIN case?  I have a new Pioneer radio/CD player but I need to remove the rear of the ISO case for wire access.  The old Sony radio just slide in and connected automatically.  Exactly what to do?
1994 U225
build #4514

Re: Changing out radio on older uni-home

Reply #1 –
Pat, I replaced the original radio with a pioneer.  I did have to remove the old mount and install the DIN mount that came with the radio, then splice in all speaker wires.  It also has a plug in the rear for my IPOD>

Re: Changing out radio on older uni-home

Reply #2 –
Quote from: PatC –
Has anyone changed out a radio on a U225 or U240?  Did you have to replace the Sony ISO DIN case?  I have a new Pioneer radio/CD player but I need to remove the rear of the ISO case for wire access.  The old Sony radio just slide in and connected automatically.  Exactly what to do?

Pat, I have changed out three radio in this vintage of Grand Villa. I changed the case even though I replaced the radios with new Sonys.  The new Sonys didn't use the DIN of the original. I found it easiest to remove the CRT and mount for the Audit system and the heater control unit. Its just easier to rewire everything in a clear space. I used crimp fasteners and wired the radio into the house batteries since I use the chassis sound system for the TV and movies. The whole job takes less than an hour. Its not that much of a project.
The selected media item is not currently available.Kent Speers
Locust Grove, OK
1993 U300 SSE 40' (Restored at FOT 2009) Build 4323
720 watts Solar
6V92TA DDEC Silver Engine
2014 Subaru Outback

Re: Changing out radio on older uni-home

Reply #3 –
Hi Pat,

Usually, the DIN chassis of modern radios are designed to fit a specific Brand/Model of radio.  For example, if you replaced a Sony Model 100 with a Sony Model 200 or Kenwood Model 100, the chassis would need to be replaced.  This is required because the receptacle on the back of the radio which plugs into the chassis is usually different between models.  I'm changing the radio on my coach this Saturday (Older Sony to newer Sony,) and I am planning on the need to replace the chassis.  Not sure how old your current radio is, but replacing a chassis is very simple and straight forward.  With all of the wires connected to a circuit board on the back of the chassis, you'll be back listening to your favorite in no time.  Hope this helps.
Brian and Jen

Re: Changing out radio on older uni-home

Reply #4 –
Pat,

I just replaced my Sony with a Pioneer about 3 weeks ago.  In order to get the old chassis (frame that holds the radio) out, you have to insert a "key" on each side to back off the detents in the chassis.  The key is a flat tool about 4 inches long, 1/4" wide and 1/16" thick.  Perhaps they are in your glove compartment.  Your new Pioneer will come with its own set of keys, specific for that chassis.  I couldn't find my keys, so I had Keith Risch at Encore RV remove the old radio and install the new one.
Don Hay
'92 Grandvilla, U-280
The Hayfever Express
Build #4055
'97 GEO Tracker
Life is like licking honey off a thorn.

Re: Changing out radio on older uni-home

Reply #5 –
On my 99 I put in a sony and had to splice the wires since it was different. It worked fine but it was a pain to do.  DOn is correct, you can use a key to pull the radio out of the slot as well.
2025 Wanderbox Outpost 32 on F600 Expedition Motorhome
2015 Born Free Royal Splendor on Ford 550 nonslide version  for sale
Former Coaches  covering. 360,000 miles
1999 34 U270
2000 36 U320
2001 42' double slide U320
2018 Jeep Rubicon

Re: Changing out radio on older uni-home

Reply #6 –
It is all done.  Both DIN chassis were extremely tight.  New Pioneer in place, and DW can plug in her Ipod. 

But found out that there was nothing wrong with old radio.  It had a well hidden fuse which was blown, three fuses all together.  The main 5 amp fuse was okay???  But the 10 amp Bosch (glass) fuse between it and the radio was blown???  Makes no sense except someone must have done it on purpose.  Two for main power and one for clock and accessory power.  Don't know what caused that, but the radio was dead until we found the fuse holder buried and tried a new fuse.  But the new radio works great, plays CDs, and everything else.  And has a great AM tuner to boot!  Need to have AM for me to be able to hear NPR.
1994 U225
build #4514

Re: Changing out radio on older uni-home

Reply #7 –
My Sony radio worked fine; but we wanted to play discs.  Being mechanically and electronically challenged I have almost all work on my motor home done by people who know what they are doing.  I bought a new radio including installation at a Fry's store.  Install took less than 1/2 hour and works fine.
I admire those who do what I can't.
Alan and Bobbie Dodson
1991 Foretravel GV 280
2000 Jeep Wrangler   
Alan Dodson
1991 U280 GV 36'

Re: Changing out radio on older uni-home

Reply #8 –
Alan,

Ditto.....most of the time I have no idea what these strange people are discussing... :P :P :))
We are only strangers until we meet; however, some of us are stranger than others
 

Re: Changing out radio on older uni-home

Reply #9 –
Quote from: alandodson –
Install took less than 1/2 hour and works fine.
 
Except for removing the monitor, that is how long it took my son to do it.  But every wire was marked what it was for.  I was quite impressed!!!
1994 U225
build #4514