Skip to main content ↑ ↓
Topic: Where to locate exhaust parts (Read 796 times) previous topic - next topic

Where to locate exhaust parts

I'm looking to replace my exhaust system to include the muffler.  Would there be part numbers or were these made at the factory?
David in VA
1994 Unihome Grand Villa U280

Re: Where to locate exhaust parts

Reply #1 –
Leave the muffler off and just have a resonator put in close to the end. I just took out mine and put SS flex and straight pipe in-sounds good and you get rid of weight and heat. Do not need it with a turbo
John
Coachless, now use aircraft. 2003 Ford Travelair TC280 class C. Super shape. Just for 1 yr .
1994 Ford E350 ClassC,total renovation inside and out. Now sold.
2000 U295  36' Cummins 350 c/w Banks Stinger, Resonator upgrade,Solar, LED lites.Residential fridge with slide out pantry. Build 5674. Sold
ex 92 GV 022C ored Cummins. Sold
ex 95 GV240 cat 3116. Sold
2017 Mini cooper s & 2016 land Rover LR2 HSE  LUX.
jhaygarth@aol.com    SKP #130098
treat everyone as you would like to be.

Re: Where to locate exhaust parts

Reply #2 –
Like to add to the already mentioned, less weight, lot less heat, but also improved power and fuel burn,

Once you make the change to the resonator, I doubt you will want to go back to the bulky, heavy, heat generating muffler restrictor system.  ^.^d

Re: Where to locate exhaust parts

Reply #3 –
Quote from: David Smith –
I'm looking to replace my exhaust system to include the muffler.  Would there be part numbers or were these made at the factory?
Dave,
I didn't have much luck with FOT or MOT when I was rounding up parts to replace my exhaust system.
Take a look at slide #13 of the following to see my bill of materials;

http://www.foreforums.com/index.php?action=media;sa=album;in=210

I've been extremely pleased with what my son and I put together.  I like it a whole lot better than the original design; lighter weight, much less mass radiating high heat, AERO design prevents the impounding of exhaust products, smaller (muffler/resonator) cross section, all 304SS components, system stability (doesn't beat up the fiberglass exit port),  mellow SOUND, gains in performance and maybe even fuel economy (slight, but the engine definately breathes better).
A good truck shop, that's willing to work on your coach, should be able to do the same thing.
FWIW,
Neal
The selected media item is not currently available.
Neal (& Brenda) Pillsbury
'02 U320 SPEC, 4200, DGFE, Build #5984
'04 Gold Wing
'07 Featherlite 24'
'14 Jeep Grand Cherokee Summit
MC #14494
Exeter, NH & LaBelle FL
Quality makes the Heart Soar long after Price is Forgotten

Re: Where to locate exhaust parts

Reply #4 –
Another tidbit on the biggie concerning fuel improvement with a resonator setup.

Yes the engine does run freer and if driven the exact same way it will give better fuel mileage, however I for one, like the way it runs and use more throttle burning more fuel.
The heat issue is much less no matter how you drive it.

My last trip provided better mpg than the same one before the change to the exhaust.

I am sure anyone can argue one way or the other, but in the real world the setup is very capable of producing better fuel mileage.  MPG is still a product of your right foot.
 

Re: Where to locate exhaust parts

Reply #5 –
Thanks to all the folks for the reply's, especially Neal for the slide show.......I will be going with the resonator set up now.
David in VA
1994 Unihome Grand Villa U280