Skip to main content ↑ ↓
Topic: Reverse image of tank gauges on video monitor (Read 838 times) previous topic - next topic

Reverse image of tank gauges on video monitor

Ever since we had a new video camera and monitor installed we have lived with the images of the tank gauges being backwards.  But I am married to a genius.  CQ discovered that when the tank gauges are on the screen that if she very lightly presses on the right edge of the Power switch that -- viola!!!-- the tank images read left to right.

However, it is no big deal to read the gauges backwards and we have gotten used to it.  I just thought I'd pass along this anomaly.  I think we have a Panasonic Voyager camera.
George Stoltz.  Retired from full-time living in a great Foretravel and now are back to living in a traditional sticks and bricks in Florida.

Re: Reverse image of tank gauges on video monitor

Reply #1 –
If both new monitor and camera offer reverse image feature, merely switch which is set to reverse image so that the tank gauges read properly.  That is exactly what I did when I replaced mine.  If you bought a camera or monitor that does not have the reverse image feature, obviously that will not work.

Brett
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020
 

Re: Reverse image of tank gauges on video monitor

Reply #2 –
Brett,
Both do not have the reverse feature.
George Stoltz.  Retired from full-time living in a great Foretravel and now are back to living in a traditional sticks and bricks in Florida.