Skip to main content ↑ ↓
Topic: Dump valve replacement (Read 930 times) previous topic - next topic

Dump valve replacement

Does anyone know if the original dump valves (Theford, I think) can be directly replaces with the Valtera valves? Are the bolt patterns and the thickness the same? I wanted to buy the valves before I take it all apart so I only have to take it apart once. The Valtera that I added as a third valve is 3 3/4" bolt pattern and 13/16" thick
Thank you,
Rick
Rick

Re: Dump valve replacement

Reply #1 –
I am pretty sure that the thetford dump valves are quite different from the valterra valves. the thetford valves I am familar with are held together with phillips screws and when taken apart there is a large gasket that goes between the two halves and a new seal for the blade
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins
 

Re: Dump valve replacement

Reply #2 –
Red Tractor,
                    I pulled the panel yesterday to look at the valves and they are Valtera valves. Easy replacement.
Rick