Skip to main content ↑ ↓
Topic: Alcoa lugnut covers (Read 836 times) previous topic - next topic

Alcoa lugnut covers

Does anyone have a source for lugnut covers for our Alcoa wheels? We lost one while on I-80 headed to Yellowstone. 

When we had new tires installed, the guy messed up a few of them and they were very loose. 
Tom & Bill

2013 Jeep Grand Cherokee

Re: Alcoa lugnut covers

Reply #1 –
You can make it simple and call parts dept at MOT or track down some supplier that might be able to order them for you, providing yu can give him the right part number.
I find MOT a easy simple place to get some parts, FOT for others.
Dave M

Re: Alcoa lugnut covers

Reply #2 –
Dave and Nancy Abel provided this link awhile back: 
Alcoa 33mm chrome plastic hex lugnut cover, thread-on style

I believe you just have to verify the size and whether you need threaded or push-on.
The selected media item is not currently available.

Mark & Mary Benko
Former coach: 2005 U295 3823
Jeep Cherokee, Honda Fit

Re: Alcoa lugnut covers

Reply #3 –
When someone stole our lug nuts and covers, FOT did not have the parts, we found them at a store called sixrobbles, check their web site sixrobblees.com they supply trailer and truck equipment and they can help you out
Gary & Claire
Talent, Oregon
2008 40' Nimbus SE
ISM 500
#16103

Re: Alcoa lugnut covers

Reply #4 –
I found the rplacements @ Rush Truck Center in Yuma.
There are two kinds of ships in the world;
Submarines and Targets!

Re: Alcoa lugnut covers

Reply #5 –
After much searching and appreciating the service and shipping charges from various suppliers, FOT was by far the best source. at about 3.50 tp 4.00 each last spring.
r.schwab
2004 U270 36'

Re: Alcoa lugnut covers

Reply #6 –
Here's where I get them:
Alcoa 33mm chrome plastic hex lugnut cover, thread-on style

$3.59 each.  I think there was a qty 10 discount, but I don't see it right away.  I get 10 at a time, and when they break or get stolen (does happen!) I've got them to replace.
Dave and Nancy
1999/2013 U270 36' Xtreme
Motorcade # 16774
2013 Subaru Outback
KD0NIM

Re: Alcoa lugnut covers

Reply #7 –
They are also available from truckerdeals.com, check the sub categories.  I believe in 10 packs.
Bob Thomas
Sacramento, CA
Present:  1997 U320 '40
Previous: 1997 U295 '36
Bluegrass fan, and festival emcee
 

Re: Alcoa lugnut covers

Reply #10 –
Rick,

I lost at least a couple of covers on the rear wheels after every long trip. The Alcoa covers will not sit flat against the hub cover whenever one of the nut points are at the raised edge of the hub cover. I looked at one of your pictures and you have the same issue. The stainless steel covers are very thin and are less impacted by the raised edge. I kept Alcoa covers on the front wheels as there has been no issues.

Bob
The selected media item is not currently available.Bob & Faith Rozek
1997 U320 40'
Xtreme Remodel
2010 Scion XD