Skip to main content ↑ ↓
Topic: HWH slide room (Read 1101 times) previous topic - next topic

HWH slide room

On my 2006 Phenix one of my bedroom slides will not go in.  The yellow light just keeps blinking even though the air bladder has deflated.  I have tried resetting the HWH button on more than one occassion with no luck.  Fortunately I am in my drive way.  I put the slides out to wash it and plan on waxing tomorrow but need the slide in so I can pull into the garage.  Any help would be appreciated either through a response here or by phone 337-580-1958.
Thanks,
Gerard
Gerard Caswell
Eunice, LA
2006 Phenix
2011 GMC Sierra P/U 4x4

Re: HWH slide room

Reply #1 –
I would be calling FOT and/or MOT, they both are great on helping on these tech issues.
Dave M

Re: HWH slide room

Reply #2 –
I had called FOT and was waiting on call back when I posted. Bob Ireland was on call and we unplugged the pressure switch for that room and rep lugged and it reset itself and worked. Will cy le it tomorrow and see what happens.
Gerard Caswell
Eunice, LA
2006 Phenix
2011 GMC Sierra P/U 4x4

Re: HWH slide room

Reply #3 –
That's what I was thinking, a pressure switch issue. Would be interested in what else you may find and if you have any other issues with it.
Previous coach - 2007 Phenix 45'

Re: HWH slide room

Reply #4 –
Well I recycled the slide and it went out fine but won't come back in again.  Plan to investigate further this afternoon.  Could be the pressure switch or a computer issue.
Gerard Caswell
Eunice, LA
2006 Phenix
2011 GMC Sierra P/U 4x4

Re: HWH slide room

Reply #5 –
We think we have isolated the problem to the pressure switch and I should have one arrive today.  Now I just ned to figure out how to change it.  Has anyone done this before?
Gerard Caswell
Eunice, LA
2006 Phenix
2011 GMC Sierra P/U 4x4

Re: HWH slide room

Reply #6 –
Well they sent the entire assembly with the switch and brass piece as one.  Easy swap just trun off air, unplug switch and then unscrew from brass housing and install new one.  Back up and working and I will keep an eye out for a leak now.
Gerard Caswell
Eunice, LA
2006 Phenix
2011 GMC Sierra P/U 4x4

Re: HWH slide room

Reply #7 –
Thanks for the update. Can you list the part number they sent? Seems I may want to order one of these to keep as a spare.
Previous coach - 2007 Phenix 45'
 

Re: HWH slide room

Reply #8 –
I am not sure I have the box any longer.  In my haste it may have been thrown out but you can get the number from FOT.
Gerard Caswell
Eunice, LA
2006 Phenix
2011 GMC Sierra P/U 4x4