Installing satellite receiver for bedroom tv

Topic: Installing satellite receiver for bedroom tv (Read 932 times) previous topic - next topic

Installing satellite receiver for bedroom tv

February 04, 2013, 06:20:00 pm

Is it possible to place the receiver between the coax cable going to the rear tv and the rear tv? Then can one operate the receiver as you do the front receiver. Now both tvs must watch the same satellite channel. I would like to be able to watch different satellite channels. Thanks

John
2000 Foretravel U320

Re: Installing satellite receiver for bedroom tv

Reply #1 – February 04, 2013, 07:41:00 pm

I have two boxes. The second box is only 5 dollars a month

Re: Installing satellite receiver for bedroom tv

Reply #2 – February 04, 2013, 07:46:09 pm

Yes if you have a dual lnb sat dish if on direct tv, not sure about dish network

Re: Installing satellite receiver for bedroom tv

Reply #3 – February 04, 2013, 07:52:19 pm

If you have Dish you can get a receiver that will allow you to use the one receiver and operate 2 different TV's on 2 different channels. Thats what I have been using for several years. You can also record from both tvs.

Re: Installing satellite receiver for bedroom tv

Reply #4 – February 04, 2013, 07:57:00 pm

Combining Ron and Jimmy's responses...

Need to know which dish (make and model; need dual or better LNB), which receiver (make and model, need dual or better tuner).

Re: Installing satellite receiver for bedroom tv

Reply #5 – February 04, 2013, 10:21:27 pm

As John S. mentioned, with DirecTV you can get additional receivers for $6.00 per month. Each receiver allows a different channel if desired. We have a DVR receiver in the front and a regular receiver in the bedroom. DW gets the big TV, I get the bedroom TV, of course.

Re: Installing satellite receiver for bedroom tv

Reply #6 – February 05, 2013, 12:22:27 am

I have a DISH receiver with a TRAC STAR in-motion set up. I only have one receiver that operates the same channel on both TV's. You can get a dual receiver from DISH which gives you the benefit of watching different channels on different TV's using....you do not need 2 different single receivers....you only need one dual receiver, make sense? The additional receiver only costs $6/month.....what a deal!

95% of the channels I watch are on satellite 119 on DISH. If I want to watch a channel that is on satellite 110 DISH, I have to manually switch the satellite...not big issue just something else to do. One issue....as far as I know you cannot get an in motion HD system.....so I do not have HD satellite, but I am currently researching this issue to see if the technology is now available, I hope it is!

Re: Installing satellite receiver for bedroom tv

Reply #7 – February 05, 2013, 11:13:24 am

As a new kid on the block, I have a couple of questions concerning my Trac Vision.

When the MOHO is parked with the sat system operating, I find the Trac Vision (with DTV) tends to lose signal and and re-lock on (in good weather with a clear sat line of view). Then it will/may lose the signal again and then lock on again. Should it not lock on and stay locked on until shut down?

My system (in motion 360) has a relay somewhere that disconnects the power to the TV when the ignition key is on. I assume this keeps you from driving and watching TV at the same time. Are other FT's configured this way?

Thanks,

jack

Re: Installing satellite receiver for bedroom tv

Reply #8 – February 05, 2013, 12:07:46 pm

"My system (in motion 360) has a relay somewhere that disconnects the power to the TV when the ignition key is on. I assume this keeps you from driving and watching TV at the same time. Are other FT's configured this way?"

All Foretravels are configured this way from the factory. You can disable this feature by going to your electrical drawings and finding the circuit breaker number for this circuit in the front passenger circuit breaker panel and disconnect it.

Re: Installing satellite receiver for bedroom tv

Reply #9 – February 05, 2013, 12:38:48 pm

On my 93 and 95 there was a relay controlled plug adapter at the outlet behind the TV. Removed the adapter and plugged the cord directly into the outlet.

Re: Installing satellite receiver for bedroom tv

Reply #10 – February 05, 2013, 01:05:59 pm

Quote

Need to know which dish (make and model; need dual or better LNB), which receiver (make and model, need dual or better tuner).

The Dish I am using is the Winegard Trav'ler SK1000 it is for the Dish Network. It is
HD not in motion and the Dish receiver is a VIP 722 HD Duo DVR. Hope this helps

Re: Installing satellite receiver for bedroom tv

Reply #11 – February 05, 2013, 08:46:05 pm

Quote from: Dave Head – February 05, 2013, 12:38:48 pm

On my 93 and 95 there was a relay controlled plug adapter at the outlet behind the TV. Removed the adapter and plugged the cord directly into the outlet.

Ditto up through model year 2000, at least.
Neal

Re: Installing satellite receiver for bedroom tv

Reply #12 – February 05, 2013, 10:59:34 pm

I have a Trac Star in motion satellite system. I have had problems with it but Trac Star rebuilt it and works great now. I have a DISH receiver. When parked mine now stays locked on the satellite...no issues. When you are parked you can put it in Idle/Hold status and the LNB will not continue to move back and forth making that annoying noise. If you have any questions concerning the Trac Star you can call them at 407-650-9054, ask for Jim or Al in Tech support, they have been extremely helpful to me EVERY time I call them, they know me by now!

Re: Installing satellite receiver for bedroom tv

Reply #13 – February 06, 2013, 09:51:00 pm

Agree with Steve - my Trak Star/Dish stays locked on when placed on idle/hold - no problems and the support folks are very helpful. I used them once when I first reprogrammed the Trak Star from DirectTV to Dish.

Re: Installing satellite receiver for bedroom tv

Reply #14 – February 06, 2013, 10:38:00 pm

Thanks for the responses and information. Very helpful.

I will contact Trac Vision for their help.

jack

Re: Installing satellite receiver for bedroom tv

Reply #15 – February 07, 2013, 08:58:10 pm

I have a question now.......Is in motion HD available through Trac Star or another vendor? Anyone know about this please comment.....thanks!!

Re: Installing satellite receiver for bedroom tv

Reply #16 – February 07, 2013, 10:26:27 pm

For any HDTV, unless you can stream HD wireless, you have to use a HDMI cable from the sat receiver or blu-ray player to the TV. Any other cable will only see 480I max. Probably not a big deal with a 20" bedroom TV but a quite visible difference with a larger screen. In other words, coax or composite out won't do it.

Pierce

Re: Installing satellite receiver for bedroom tv

Reply #17 – February 07, 2013, 11:14:46 pm

Thanks, but I understand that u have to use HDMI cable. My question is....does anyone know if there is "in motion" HD available for a DISH receiver...

Re: Installing satellite receiver for bedroom tv

Reply #18 – February 07, 2013, 11:24:50 pm

Quote from: Steve Mudd – February 07, 2013, 11:14:46 pm

Thanks, but I understand that u have to use HDMI cable. My question is....does anyone know if there is "in motion" HD available for a DISH receiver...

Google knows

I searched for in-motion dish hd and got a hit on the Winegard page

Satellite for RV, Winegard RoadTrip MiniMax, DIRECTV, DISH NETWORK

As well as DishForMyRV confirming it on the FAQ (scroll to the bottom) DISHForMyRV - Frequently Asked Questions about RV Satellite Service

ETA there's a King Controls one, too http://www.kingcontrols.com/king_dome/kd3000.asp

Michelle

Re: Installing satellite receiver for bedroom tv

Reply #19 – February 07, 2013, 11:45:17 pm

Thanks......appreciate it, guess I need to think "google"

Affiliate Notice