Skip to main content
Topic: Quick Inverter ATS question... (Read 357 times) previous topic - next topic

Quick Inverter ATS question...

Travelers,

One of my ATS's was humming under the bed so I decided to replace them both with the Lyght LPT50BRD.

The olde ones are out and the new one for the inverter is installed but I am now wondering about using this ATS on the single 120V leg???

There is a warning inside the box cover that says "The transfer switch may not work if power is lost to one 250V hot leg..."

Has anybody used this particular switch successfully on the inverter circuit?

Cheers

Chris

Chris 1999 U320