Re: U 240 Wide Body Reply #20 – May 20, 2015, 09:11:17 pm Quote from: Dave M – May 20, 2015, 09:01:46 pm I Choose to cross the problem at an angle and not let it scape the tail.Us too, as if you get high centered on these you will be waiting on a tow.Pamela Quote Selected
Re: U 240 Wide Body Reply #21 – May 20, 2015, 10:01:24 pm Quote from: Pamela & Mike – May 20, 2015, 08:48:48 pmDave,These are what were on our 240 and what is presently on our 320. They may have been special order by previous owner and installed at time of build. They are rebuildable as we have talked to these folks before about replacement bearings.http://www.castercity.com/eshop/10Expand.asp?ProductCode=100FS6x3T-S&ReturnTo=../cm100.htmPamela & MikeThose are very similar but the ones I saw had a bigger wheel, more like a grocery store stockers cart with the tall wire sides probably 7 inch in height. But my theory has been at least 3/4 proved.MR Wolfe, Could you please post a photo / picture of where exactly the measuring points are on the 1995 U 240, I saw one to day and I'm not sure I measured it correctly, it was 16 inches on one side and 17 on the other. I also did not see any shims awaiting removal?Thank you. Quote Selected
Re: U 240 Wide Body Reply #22 – May 21, 2015, 12:27:27 am Sabre,Height of U240 & U225 "Torsalistic" Suspension has several postings already such as u225 suspension lift pics of partsIf you search the forum you should find what you need about it already.If you encounter difficulty let us know we can help.AL Quote Selected
Re: U 240 Wide Body Reply #23 – May 21, 2015, 12:30:33 am Sabre,Here is another subject matter you should be aware of ... if you are looking at a U240BULKHEAD REPAIR - drainage around box beam? Quote Selected
Re: U 240 Wide Body Reply #24 – May 21, 2015, 01:48:07 am Quote from: propman – May 21, 2015, 12:30:33 amSabre,Here is another subject matter you should be aware of ... if you are looking at a U240BULKHEAD REPAIR - drainage around box beam?Is this problem only occurring in the U 240 or all models?Because the U240 Storage doors open upward, and I understand all others open downwards. Quote Selected
Re: U 240 Wide Body Reply #25 – May 21, 2015, 01:58:41 am Quote from: propman – May 21, 2015, 12:27:27 amSabre,Height of U240 & U225 "Torsalistic" Suspension has several postings already such as u225 suspension lift pics of partsIf you search the forum you should find what you need about it already.If you encounter difficulty let us know we can help.ALThanks my friend, I missed that piece ! I seem to have measured it correctly so something was drastically wrong with it. Quote Selected
Re: U 240 Wide Body Reply #26 – May 21, 2015, 08:09:12 am Quote from: Sabre – May 21, 2015, 01:48:07 amIs this problem only occurring in the U 240 or all models?Sabre,Start with this "sticky" topic Bulkhead Repair-- A Comprehensive LookFrom there, just search the forum for bulkhead separation and it should pull up threads describing the issue, what to look for, how to repair, etc.Michelle Quote Selected
Re: U 240 Wide Body Reply #27 – May 21, 2015, 08:21:11 am Quote from: Sabre – May 21, 2015, 01:48:07 amIs this problem only occurring in the U 240 or all models?Because the U240 Storage doors open upward, and I understand all others open downwards.Sent you a PM.No, the bulkhead issue is with all Unihomes and Unicoaches. It does not apply to the Oshkosh chassis. Also nothing to do with basement door orientation. Quote Selected
Topic: U 240 Wide Body