Skip to main content ↑ ↓
Topic: New Corian/Vinyl Tile Entry Steps (Read 866 times) previous topic - next topic

New Corian/Vinyl Tile Entry Steps

After buying our coach this spring and replacing tires, fluids, and filters a few interior changes were in order.  We replaced the original front area carpet, kitchen wood flooring, and bathroom vinyl tile with Karndean Vinyl tiles (with grout joints).  The step treads, edge trim, and step cover supports were replaced with Corian. 

Marine grade 1/2" thick plywood was installed as underlayment and potential sound deadener. Road noise is no more evident now than before, so whether it worked or not result is pleasing.

Seems for every item checked off the to do list, several more are added...
2019 Pleasure Way Lexor

Re: New Corian/Vinyl Tile Entry Steps

Reply #1 –
Stunning. Looks fantastic.
1993 U300 40ft GV SE
Build # 4344

Re: New Corian/Vinyl Tile Entry Steps

Reply #2 –
Who did the work? Yourself or what shop?  Nice job!!!! ;D
Dan & Shirley Stansel
2002 U295 4020 AGDS Build#6054
Towing Buick Enclave & M &  G Braking
Emerald Bay, Lake Palestine, Texas
MC# 16650

Re: New Corian/Vinyl Tile Entry Steps

Reply #3 –
  Nice job, looks great.
    Big improvement over the carpet on the side walls.
Jim & Doreen
2003 U320

 "Too often I would hear men boast of the miles covered that day, rarely of what they had seen"
― Louis L'Amour

Re: New Corian/Vinyl Tile Entry Steps

Reply #4 –
Looks fantastic!
I'm not used to seeing Corian used "under foot", How wear resistant is it compared to oak or other step materials?
Is it slippery when wet or damp?
Where do you purchase the raw corian and glue?
1995 U320C SE 40'
Jeep 4x4 Commander - Limited - Hemi
"The Pack"  Yogi and Diesel our Airedales -  Charlie our Boxer/Akita mix. Gone but NEVER forgotten Jake our yellow Lab.
NRA Law Enforcement Firearms instructor - Handgun/shotgun
Regional Firearms instructor for national Armored Transp. Co.

Re: New Corian/Vinyl Tile Entry Steps

Reply #5 –
Thanks for the kind words!

Work was done at our shop after much research from the kind folks here willing to share their similar experience.  I did some but not nearly all of the work. 

Corian is a filled plastic and as such is very durable.  Cuts and machines like wood.  Glues with 2 part epoxy to form virtually invisible seams.  The tread material is 1/2" thick and has a built-up edge.

One pitfall is the moderate tendency to scratch.  Darker colors show more than light.  Easy to remove by sanding though. 

Our last two shower pans were fabricated from Corian; being slippery has not been an issue.  We did route a simple groove pattern into the surface to help prevent slips.

It's available though authorized fabricators. 


2019 Pleasure Way Lexor

Re: New Corian/Vinyl Tile Entry Steps

Reply #6 –
Did you replace the bottom plywood under the threshold with corian? That is often where you will find water damage with the "wet step" design that Foretravel used for a couple of years. If so, I presume you would have added some support under the corian... That is a tricky job in my experience. I used Starboard to rebuild the step treads and threshold with the threshold being supported by stainless steel flat stock and aluminum angle, but I do like the looks of the Corian.
Don

The selected media item is not currently available.
Don & Tys
1999 U270 3602 WTFE #5402
Xtreme Stage 1 w/Headlight, Step Conversion, etc.
2009 Honda Fit Sport with Navi
Freedom is NOT "just another word for nothing left to lose"... with apologies to Kris Kristofferson

Re: New Corian/Vinyl Tile Entry Steps

Reply #7 –
The results look great!
David and Carolyn Osborn
1995 U320C SE 40' Build 4726 Feb 1995
FMCA 147762
Motorcade 17186
 

Re: New Corian/Vinyl Tile Entry Steps

Reply #8 –
Quote from: Don & Tys (AKA acousticart) –
Did you replace the bottom plywood under the threshold with corian? ... If so, I presume you would have added some support under the corian...
I reviewed your post " Step Repair or Renovation" about 1,000 times before jumping in and removing everything down to the skeleton.  Replaced the bottom plywood with a second layer of Corian supported at the perimeter with aluminum angle.  Made an aluminum pan sealed to the exterior and filled it with about 2" of sprayed in foam to replace the original semi disintegrated foam.  Fortunately the plywood sides were in excellent shape and needed no attention.  Sturdied up the stair framing a bit and put it back together.  Thanks for such an invaluable and complete pictoral on the subject. 
2019 Pleasure Way Lexor