Skip to main content ↑ ↓
Topic: 10 KW Power Tech Fuel Kill Solenoid  (Read 358 times) previous topic - next topic

10 KW Power Tech Fuel Kill Solenoid

When I first got the GV out of its 13 year sleep the generator would not start. I discovered it was a bad  fuel kill solenoid. I replaced it and the generator ran fine. Last weekend while working on the inside I ran ran the generator. After about 2 hours the generator died. I checked and again it was a bad solenoid. I ordered one and replaced it.  Today while working on the on the inside with the generator running ...you guessed it...after about 2 hours it died...... and again it is a bad solenoid.

I  have checked VDC on the solenoid and it is 12.1 VDC.  Any ideas??  Generator only has 393 hours on it.
Karl Shurtleff
Kingwood, TX
94 U280 Grand Villa 36'
Build #4487
 

Re: 10 KW Power Tech Fuel Kill Solenoid

Reply #1 –
Karl,
The relay that powers the electric fuel pump would be on the ES-52 circuit board,  Have no idea where a "fuel kill solenoid" would be located, maybe a picture would help.