Skip to main content ↑ ↓
Topic: Need stock filter houseing  (Read 541 times) previous topic - next topic

Need stock filter houseing

The last owner replaced the original eng air filter system with one of those K&N filter . And i just don't think it's good enough . I have called FT, and was told good luck finding and old filter housing . All help appreciated . 
1992 U300 Anniversary Edition wrong color DDC6v92T Big step up from my 1983 35' fc Blue Bird .

Re: Need stock filter houseing

Reply #1 –
Donaldson still makes a Konepac style filter housing if that is what you are after.  You could pretty much use any housing that flows enough air for your engine. 

http://india.donaldson.com/en/engine/support/datalibrary/061238.pdf

Interesting to note that Donaldson states this is old technology though and recommends newer better air filtration though.
Robert
Build # 5304
1998 34' U270 Cummins 6CTA8.3

Re: Need stock filter houseing

Reply #2 –
Quote from: lovetogo –
The last owner replaced the original eng air filter system with one of those K&N filter . And i just don't think it's good enough

Not only is it not good enough, it can cause serious issues - it just doesn't filter adequately and can let "undesirable material" to flow through and into the engine.  You're very wise to replace it with a real filter.
Learn every day, but especially from the experiences of others. It's cheaper!  - John C. Bogle

2000 U320 36' non-slide / WildEBeest Rescue
2003 U320

Re: Need stock filter houseing

Reply #3 –
Quote from: lovetogo –
The last owner replaced the original eng air filter system with one of those K&N filter . And i just don't think it's good enough . All help appreciated .
Why try to replace the can?  Cross the K&N to a NAPA or any other brand part number.  K&N number should be on the filter somewhere.  Just a thought.  David
David & Lou Ann Bouchard
Summer: Mount Vernon, Ohio
Winter: RiverBend Motorcoach Resort  LaBelle, Florida
2003 U320 38' Build #6174 "Willie"
2013 Cadillac SRX Toad
MC #17151 FMCA #F431393

Re: Need stock filter houseing

Reply #4 –
I figured they removed the entire air intake system and probably mounted a K&N cone filter right to the turbo. ANY filter you can put on would be better if this is the case. (K&N probably doesnt make a filter for our housings)

The oem system would be best, but any durable, heavy duty paper filter would be better than a K&N. Just make sure it matches the oem flow rate (1650CFM)
Matt
95 U300, 78k miles
Cat 3176 Jake Brake, HD4060.

Re: Need stock filter houseing

Reply #5 –
A Donaldson Duralite or Ecolite air filter would be my choice. They are built into the housing and you replace the whole thing based on restriction, never cleaning the element. They are affordable and easily sourced/adapted to your engine. even the wrong paper filter is better than any k&n filter.
Matt
95 U300, 78k miles
Cat 3176 Jake Brake, HD4060.

Re: Need stock filter houseing

Reply #6 –
Thanks every one for the help. I'm getting this K&N off my coach ASAP!!!
1992 U300 Anniversary Edition wrong color DDC6v92T Big step up from my 1983 35' fc Blue Bird .

Re: Need stock filter houseing

Reply #7 –
Where are you located? I have dozens of housings we could retrofit to your rv. my shop is at IAD airport, sterling, VA.
Matt
95 U300, 78k miles
Cat 3176 Jake Brake, HD4060.
 

Re: Need stock filter houseing

Reply #8 –
Quote from: car54 –
A Donaldson Duralite or Ecolite air filter would be my choice. They are built into the housing and you replace the whole thing based on restriction, never cleaning the element. They are affordable and easily sourced/adapted to your engine. even the wrong paper filter is better than any k&n filter.
mot did 'nt stock the housing anymore but did give me the part number and put me on the right road to get one from there suppler . They could still get the filter housing for 800.00 dollars :(    will that was not going to happen , so i looked on E bay and found a big Econlite  built in filter & housing thats 2' by 9 5/8 "  the problem is that that the inlet openings are 5 7/8 " the piping coming  off the turbo is 5" . I know i should be able to get the rubber garments to step from one to the other . Also being i will need a cap for the inlet side of the Econlite filter housing i thing I'll just use the K& N JUNK  ;) P.S by the way the Econlite filter with housing was 99.00 plus 20.00 shipping . I hope i can route the piping up to the top of the engine compartment to help keep it away from dirt & water . 
1992 U300 Anniversary Edition wrong color DDC6v92T Big step up from my 1983 35' fc Blue Bird .