Skip to main content ↑ ↓
Topic: D2 Governor PSI (Read 317 times) previous topic - next topic

D2 Governor PSI

There are plenty of posts in the Forum archives about the cut in and cut out pressures on the D2 Governor. Does anyone know what the cut in and cut out pressures were set at when the coaches are delivered from Foretravel when new? Thanks. Larry
Larry and Terry
Ex 2004 U270 36'

Re: D2 Governor PSI

Reply #1 –
Quote from: ltg –
There are plenty of posts in the Forum archives about the cut in and cut out pressures on the D2 Governor. Does anyone know what the cut in and cut out pressures were set at when the coaches are delivered from Foretravel when new?

Owner's manual on a 2003 says 90-120 (ours is section/page 4-4, instrument panel air gauges).  I would suspect your 2004 to be the same.
Learn every day, but especially from the experiences of others. It's cheaper!  - John C. Bogle

2000 U320 36' non-slide / WildEBeest Rescue
2003 U320
 

Re: D2 Governor PSI

Reply #2 –
Thanks Michelle. I never thought to look in the owners manual. The D2 Governor I just purchased from FOT has a cut-in pressure of 105 +5/-0 PSI. The D2 governor installed by a mobile mechanic in West Texas last week has a cut-In of 100 PSI and a Cut-out of 120 PSI.
Larry
Larry and Terry
Ex 2004 U270 36'