Skip to main content ↑ ↓
Topic: OTA Winegard Antenna Issue (Read 285 times) previous topic - next topic

OTA Winegard Antenna Issue

Hi All,

Trying to resolve a loss of OTA TV signal issue in my 1995 U300. TV was working fine - unit sat for 6 -8 weeks and now no TV signal. TV works fine with signal directly from Blu-Ray / DVD player so I'm eliminating the TV as the problem for the moment. I've searched the forum posts on this issue and confirmed that I have 12 VDC at the "antenna out" connection of the Winegard power supply ( SB 2000 ) located beneath the floor of the center closet in the bath. No voltage on the 75 ohm bulkhead connection center pin feeding the external antenna cable connection.  I've tried substituting a new coaxial cable at the antenna however without the 12 VDC amplifier power there was no change.  Would it be worthwhile to cut off the old 75 ohm connectors and install new ones ? Can anyone tell me the antenna cable routing path and whether there's any more splitters or connections between the 12 VDC power injector connection and the bulkhead connection at the front of the coach ?

Thanks in advance, as usual, for all comments and / or suggestions.
Jon Harris
1995 U300 Unihome
Cat 3176
The selected media item is not currently available.