Skip to main content ↑ ↓
Topic: replacing worm speedometer gear on allison 4 speed 1992 u225 cummins 5.9 (Read 513 times) previous topic - next topic

replacing worm speedometer gear on allison 4 speed 1992 u225 cummins 5.9

Has anyone replaced the speedometer worm gear on an Allison 4 speed (1992) ? my speedo and cruise quit working. I replaced cruise with king control cruise and it worked a couple times like the original bendix air cruise. I replaced the signal generator with same result, and suspect the worm gear inside the trans that turns the tang in the signal generator is stripped. Is this worm gear on the trans replacable and where can I get one? Thanks friends
1994 u300

Re: replacing worm speedometer gear on allison 4 speed 1992 u225 cummins 5.9

Reply #1 –
Wow, I'd be really surprised if that gear got stripped since there really isn't any load on it.  You may want to try spinning the mini gen at some low speed with a variable speed drill driver to see if you get any indication on the speedo.  I'd make sure that the system from the mini gen to the speedo was all good before I tackled the tranny.  Just my opinion for what it's worth to you.  Have a great day  ----  Fritz
Fritz & Kathy Johnson
1991 36'

Re: replacing worm speedometer gear on allison 4 speed 1992 u225 cummins 5.9

Reply #2 –
I replaced it on my '87. If you can tell me the number of teeth I'll look and see if I have another one. I remember that it was hard to find and I may have bought a back up. It doesn't strip....it spins (slips) on it's own shaft. It's called a pencil gear.
1994 U280, Build 4490
Deming, NM.

Re: replacing worm speedometer gear on allison 4 speed 1992 u225 cummins 5.9

Reply #3 –
Quote from: Twig –
I replaced it on my '87. If you can tell me the number of teeth I'll look and see if I have another one. I remember that it was hard to find and I may have bought a back up. It doesn't strip....it spins (slips) on it's own shaft. It's called a pencil gear.
That would be great! maybe a pic? is it easy to replace? thanks a TON!
1994 u300

Re: replacing worm speedometer gear on allison 4 speed 1992 u225 cummins 5.9

Reply #4 –
It is simple but does not look replaceable.  If you lost the speedo and the cruise it's the pencil gear. Once you have the generator assy off, there is a recessed (as I recall) bolt there that comes off with a common socket. That is the pencil gear and just lifts right out.

Now.........to remember what I did with that box of parts...hmmm.
1994 U280, Build 4490
Deming, NM.

Re: replacing worm speedometer gear on allison 4 speed 1992 u225 cummins 5.9

Reply #5 –
Here's what I have. Part on the left is the gen assy. The others are pencil gears. Not sure which one you need and also 1 of them might be the one I replaced. 

1994 U280, Build 4490
Deming, NM.

Re: replacing worm speedometer gear on allison 4 speed 1992 u225 cummins 5.9

Reply #6 –
Quote from: Twig –
Here's what I have. Part on the left is the gen assy. The others are pencil gears. Not sure which one you need and also 1 of them might be the one I replaced.
Twig that is awesome, I will remove the signal gen tomorrow morning and see what I need. Possibly sell me one of your spares?
1994 u300

Re: replacing worm speedometer gear on allison 4 speed 1992 u225 cummins 5.9

Reply #7 –
There is a gizmo in the head that makes the generator assy spin. Don't lose it.

You can have it, I no longer have the '87.
1994 U280, Build 4490
Deming, NM.

Re: replacing worm speedometer gear on allison 4 speed 1992 u225 cummins 5.9

Reply #8 –
Quote from: Twig –
There is a gizmo in the head that makes the generator assy spin. Don't lose it.

You can have it, I no longer have the '87.
that's awesome, I will dismantle tomorrow and let you know.
1994 u300
 

Re: replacing worm speedometer gear on allison 4 speed 1992 u225 cummins 5.9

Reply #9 –
Sometimes it is the drive pin with the tang on it that wears out also while you have the adaptor off take it apart and clean and regrease it as most are never greased because the zerc is not very visible
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins