Skip to main content ↑ ↓
Topic: Nick in the corian.  (Read 714 times) previous topic - next topic

Nick in the corian.

I recently opened the cupboard door in the kitchen and a glass fell out, busted and put a nick in our Corian counter top. I was livid. Is there a fix for that kind of thing. I can't be the only one that's clumsy with slow reflexes. If push comes to shove, I guess I could watch the 8track tape that came with the coach.  Thanks in advance for the variety of solutions ( I hope ).

 Robert.
Robert and Susan
 1995 36' 280 WTBI 8.3 3060r
 1200 watts on the roof, 720 Ah of lithium's
 Build # 4637. Motorcade # 17599
        FMCA  # 451505
        18  Wrangler JLUR

Re: Nick in the corian.

Reply #1 –
IT can be sanded out.
2025 Wanderbox Outpost 32 on F600 Expedition Motorhome
2015 Born Free Royal Splendor on Ford 550 nonslide version  for sale
Former Coaches  covering. 360,000 miles
1999 34 U270
2000 36 U320
2001 42' double slide U320
2018 Jeep Rubicon

Re: Nick in the corian.

Reply #3 –
+1 to what John said. We had curling iron "melt marks" on the bathroom Corian counter. My son, the tinker, simply sanded the counter top. Same in the kitchen and "drink" cabinet by the recliner. It's a DIY, if you have the equipment.
The selected media item is not currently available.
Lynn & Marilyn Sickel
Tollville, AR
1997  U320  40'
2021 Chevrolet Silverado pickup
Motorcader  17257

Re: Nick in the corian.

Reply #4 –
I can't tell from your picture, but if it a deep gouge you can find a place somewhere to sand some of your Corian and capture the dust. Mixed with a good clear epoxy you can fill the gouge and then sand down. I did this to fill some small gaps in a laminate of Corian material I used on our slide out counter top.

Good luck,
Len & Deb
Len and Deb Speiser
1999 U270 36'
2017 Jeep Wrangler Unlimited
You're either on the bus, or you're off the bus!--Ken Kesey
If you're lucky enough to live in a bus, you're lucky enough!

Re: Nick in the corian.

Reply #5 –
Hi Robert,
  DuPont the makers of Corian make color matching adhesives for their Corian products. If you have a countertop/cabinet shop near your location they can help find the name of the Corian color you have. Or they will know another shop that can help. I could not tell what color your top is. These adhesives are available in a small cartridge and a large cartridge. If you can not sand the chip out, these adhesives work very well. If your chip is a sixteenth of an inch or less it should sand out easily. Any more than that might leave a noticeable divot. There are other companies that sell these adhesives at lower prices. They work just as well. The adhesives are very easy to use.
Raymond
Raymond & Babette Jordan
1997 U 320
1998 Ford Explorer XLT

Re: Nick in the corian.

Reply #6 –
Quote from: Bob & Sue –
I recently opened the cupboard door in the kitchen and a glass fell out, busted and put a nick in our Corian counter top. I was livid. Is there a fix for that kind of thing. I can't be the only one that's clumsy with slow reflexes. If push comes to shove, I guess I could watch the 8track tape that came with the coach.  Thanks in advance for the variety of solutions ( I hope ).

 Robert.


 Sorry, I posted this as we were leaving a campground and now just realized the 2nd pic did not load. Here it is. I'm guessing the nick is 1/8 deep. Couldn't believe a shard of glass would do that.  We also have corian in our sticks n bricks and love it. Now I can't add the photo. Next post :)
Robert and Susan
 1995 36' 280 WTBI 8.3 3060r
 1200 watts on the roof, 720 Ah of lithium's
 Build # 4637. Motorcade # 17599
        FMCA  # 451505
        18  Wrangler JLUR

Re: Nick in the corian.

Reply #7 –
Corian pics
Robert and Susan
 1995 36' 280 WTBI 8.3 3060r
 1200 watts on the roof, 720 Ah of lithium's
 Build # 4637. Motorcade # 17599
        FMCA  # 451505
        18  Wrangler JLUR

Re: Nick in the corian.

Reply #8 –
One of my sink covers must not have been settled in all the way. It fell onto the floor and got several dings (mostly small) and chips. Sounds like this adhesive and sanding dust might make it look a little better.
 
Thanks,
 
Trent
Trent and Jean Eyler
2000  U295  4003  WTFE  ISC  350
Build#5603 MC#17385

Re: Nick in the corian.

Reply #9 –
Trent.

 Thanks for that thought. I was wondering where I could come up with the "sanding dust" stuff. Wasn't to excited about sanding away on the counter top. Using the covers I can take them to a corian cabinet shop to get sanded perhaps.
 
  Thanks much for all the feedback.

  Robert
Robert and Susan
 1995 36' 280 WTBI 8.3 3060r
 1200 watts on the roof, 720 Ah of lithium's
 Build # 4637. Motorcade # 17599
        FMCA  # 451505
        18  Wrangler JLUR

Re: Nick in the corian.

Reply #10 –
Quote from: Bob & Sue –
  Using the covers I can take them to a corian cabinet shop to get sanded perhaps.
Those problems occurred when I was building houses and we had a cabinet shop that did all our corian work, they had the tools and know how. I LOVE corian!  ^.^d
1993 U-240 "La Villa Grande"..CAT 3116 w/ Pacbrake PRXB...Allison 3060 6-speed..
Previous: 1983 Airstream 310 turbo diesel, 1979 Airstream 280 turbo diesel
                                      Build # 4297
                                      PNW natives
                      Home base:  'Cactus Hug' (Ajo, Arizona)
                        DW Judy & Chet the wonder dog
                        Full-Timers 'Sailing the asphalt sea'

Re: Nick in the corian.

Reply #11 –
Quote from: Bob & Sue –
Wasn't to excited about sanding away on the counter top.

I'm not at the coach, but my recollection is that there were some corian pieces glued to the back for positioning. You might try sanding one of those to get your sawdust.
 
Trent

Trent and Jean Eyler
2000  U295  4003  WTFE  ISC  350
Build#5603 MC#17385

Re: Nick in the corian.

Reply #12 –
If DuPont/Corian still make your color there is no need for the "sanding dust" as their adhesive is a perfect match. The adhesive is two part that is mixed correctly in the nozzle provided with the adhesive. Clean the chipped area with alcohol, apply a little adhesive, let it set for at least forty-five minutes, then start your sanding. Very easy process.
Raymond
Raymond & Babette Jordan
1997 U 320
1998 Ford Explorer XLT
 

Re: Nick in the corian.

Reply #13 –
Are we sure it is true Corian in Robert's '95?  If he tries color matching he needs to be sure.
Regards,
Brett

'99 42' Foretravel Xtreme
'14 Brown Motorsports Stacker
'05 Chevy SSR
'02 BMW R1150R