12 volt slide air pump
l think that the pump is fixing to take a powder.
didn't realize that the pump was running continuously when stored.. bad pop off valve on wet tank combined with a non operational check valve on front tank.. had run to the point that it stopped due to heat or whatever...
Gave it a good series of raps with a screw driver handle and it started up but runs slowly . & both settling bowls are leaking air on the drains, also the brass fitting (pop off or pressure relief?) is leaking where the dissicant bowl is....
Any idea on what a replacement motor & compressor will run $$ wise if I have to replace the whole sheebang?