Foretravel Owners' Forum For owners and Fans of Foretravel Motorcoaches September 14, 2025 ...

Does anyone know of a 98-99-2000  U320 coach that is being parted out?  Would like to check on hydraulic fan motors.
Sauer Danfoss seems to be having problems in Italy.  Ordered pump and it was suppose to be here mid Dec. 2018.  I called the wholesaler Thursday  and she sent Italy an email so Friday when I called back , Italy had responded but answer was we are having quality problems and don't know when it will be built or shipped,  I have sent email to Bondioli & Pavesi in Virginia to see if they may have a pump that will spec. out to what I have.  SO in the meantime I thought I would check to see if anyone on the forum may know if there are any slightly used pumps available.
Thanks in advance
Chris

, it's a simple hydraulic motor,  mounting pattern and dimensions, shaft size, and displacement within 5% of specs. I would think a local hydraulic shop could match you up with a common motor or find new seals.

Sorry I didn't give enough info-- I broke the threaded end off the motor shaft when taking it apart.  Motor works fine but can't hold fan on. I have talked to a couple of engineers and they advise against drilling and tapping for bolt.
The motor is a SHM2/22  Part no. M121.21.008.00 .  The problem is Sauer Danfoss is having some kind of trouble in Italy with manufacturing a new motor.  In original post I used pump and motor interchangeably  it is the fan motor that is broke.  I have put a seal kit in the other motor and it is ready to go.  Seal kit part no. is 221.20.034.OK same as what Beam Alarm posted on his re seal job.  The seal kit was about 120.00 but if it is only leaking around the shaft that is a metric seal that can be bought anywhere.  If I remember  right that seal No. is 30mm X 20 mm x 7 mm on eBay for about 7 bucks
different bolt pattern is no problem, I have mill and lathe can build new mounting bracket.
Thanks
Chris

Sorry I didn't give enough info-- I broke the threaded end off the motor shaft when taking it apart.  Motor works fine but can't hold fan on. I have talked to a couple of engineers and they advise against drilling and tapping for bolt.
The motor is a SHM2/22  Part no. M121.21.008.00 .  The problem is Sauer Danfoss is having some kind of trouble in Italy with manufacturing a new motor.  In original post I used pump and motor interchangeably  it is the fan motor that is broke.  I have put a seal kit in the other motor and it is ready to go.  Seal kit part no. is 221.20.034.OK same as what Beam Alarm posted on his re seal job.  The seal kit was about 120.00 but if it is only leaking around the shaft that is a metric seal that can be bought anywhere.  If I remember  right that seal No. is 30mm X 20 mm x 7 mm on eBay for about 7 bucks
Thanks
Chris

I can drill it ( Carbide Drill ) but the tricky part is tapping without breaking tap in hole this is a hardened shaft.
Chris